VersaCut™ Guide Bar, 16"

Part# 168VXLGK041

This product is only available through retailers or servicing dealers.

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	VersaCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.058"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	66
Bar Length	16"
Tail Mount	K041
Guide Bar Code	VXLG
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	No
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12

Specifications, Details & Support

Product Description

Strong, lightweight guide bar designed to perform in a wide range of professional applications.

Product Details

More precise cutting from a stiffer bar
Provides better balance on smaller saws
Lighter weight means less fatigue
Longer nose life and better performance with a new sprocket nose system
Reduced rail wear and more precise cutting via better chain fitup
Pitch: .325", Gauge: .058", chain drive link count: 66
Fits Craftsman, Homelite, Poulan and others, for additional fit information please see the part finder.

General
Color	Medium Grey
Volume	43.785 in³
Product UOM	Each
Weight (with Packaging)	1.605 Lb

Light-Weight Professional Guide Bars

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

CS-3600
CS-360EVL
CS-3700
CS-3900
CS-4000
CS-400EVL
CS-4010
CS-4200
CS-420ES
CS-4400
CS-440EVL
CS-450
CS-4500
CS-4510
CS-4600
CS-4610
CS-5000
CS-5100
CS-680
CS-8002

2014
2016
2035
2036
2036 Turbo
2040
2040 Turbo
2041
2045
2137
2138
2141
CS 2135
CS 2137
CS 2138
CS 2141

DCS4300
DCS4301

377
446S
488
490

ECS4000
ECV-4501

Related Products

Bar and Chain Lube, 1 Quart

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Echo

Jonsered

Makita

Shindaiwa

Tanaka

Bar and Chain Lube, 1 Quart