Skip to content Skip to navigation menu
Loading...

SpeedCut Nano™ Guide Bar, 14"

Part# 144TXLNA095

This product is only available through retailers or servicing dealers.

Guide Bar
Product Family SpeedCut ™ Nano
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325LP
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.043"
Drive Links
?
59
Bar Length 14"
Tail Mount A095
Guide Bar Code TXLN
Guard Mate Compatible
?

Guard Mate Compatible

Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
No
Intenz
?

Intenz

Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
No
Narrow Kerf
?

Narrow Kerf

Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
Yes
Bar Nose Radius Small

Specifications, Details & Support

Product Description

Power through the day with a guide bar engineered specifically for 80TXL saw chain. Designed for professionals, the high-strength body and performance-driven nose components are constructed to exacting tolerances. When the job demands accurate cuts with unmatched speed and endurance to run all-day without downtime, professionals choose SpeedCut Nano.

Product Details

  • Longer run time from a uniquely designed SpeedCut Nano 80TXL saw chain which increases saw cutting efficiency
  • Increased speed allows compact saws to take on a big projects
  • Smooth cuts and nearly no cutting chatter
  • Performance that won't stall in the cut
  • Pitch: .325 Low Profile. Gauge: .043", chain drive link count: 59
  • Fits Husqvarna
General
Product UOM Each
Weight (with Packaging) 1 Lb

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field

Rating
Back To Top