Single Rivet Guide Bar, 14"

Part# 144MLEA074

$32.47

Out of Stock

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	Single Rivet
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8" Low Profile™
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.043"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	50
Bar Length	14"
Tail Mount	A074
Guide Bar Code	MLE
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	Yes
Bar Nose Radius	Small
Sprocket Nose Tooth Count	7

Specifications, Details & Support

Product Description

The lightweight, easy to maneuver guide bar for occasional woodcutters using small electric and gasoline powered chain saws.

Product Details

Designed to pair with Oregon® 90 series narrow kerf chain for optimum performance
Reversible for longer life
Better control, less kickback
Pitch: 3/8" low profile, Gauge: .043", chain drive link count: 50
Fits Stihl
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

General
Color	Medium Grey
Volume	298.541 in³
Product UOM	Each
Weight (with Packaging)	0.983 Lb

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

009
009
009 L
010
011
012
015
017
017
018
018
018 C
019
019T
020
020 Super
020T
023
023
023C
023L
E 10
E 14
E 140
E180
E180C
HT 100 Pole Pruner
HT 101 Pole Pruner
HT 130 Pole Pruner
HT 131 Pole Pruner
HT 250 Pole Pruner
HT 70 Pole Pruner
HT 73 Pole Pruner
HT 75 Pole Pruner
MS 170
MS 170
MS 171
MS 171
MS 180
MS 180
MS 180 C
MS 180 C-B
MS 180 C-BE
MS 180 C-BE
MS 180 G
MS 181
MS 181
MS 181 C
MS 181 C-BE
MS 181 C-BE
MS 190T
MS 191T
MS 192 C
MS 192 C-E
MS 192 C-E
MS 192 T
MS 192 T
MS 192 T C-E
MS 192 TC
MS 193
MS 193
MS 193 C-E
MS 193T
MS 200
MS 200T
MS 201
MS 201 C
MS 201 C-E
MS 201 C-EM
MS 201 T
MS 201 T
MS 201 T C-M
MS 210
MS 210 C
MS 210 C-BE
MS 211
MS 211 C
MS 211 C-BE
MS 220
MS 220 Q
MS 251
MSE 140
MSE 140
MSE 140 C
MSE 140 C
MSE 140 C-BQ
MSE 170 C-BQ
MSE 170 C-BQ
MSE 180
MSE 180
MSE 180 C
MSE 200
MSE 210 C-BQ

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Stihl

Grease Gun