Skip to content Skip to navigation menu
Products

Single Rivet Guide Bar, 10"

Part# 100SDEA041

$20.99

Added to Your Shopping Cart
Share

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews
Guide Bar
Product Family Single Rivet
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
3/8" Low Profile™
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
?
40
Bar Length 10"
Tail Mount A041
Guide Bar Code SDE
Guard Mate Compatible
?

Guard Mate Compatible

Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
No
Intenz
?

Intenz

Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
No
Narrow Kerf
?

Narrow Kerf

Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
No
Bar Nose Radius Small
Sprocket Nose Tooth Count 7

Specifications, Details & Support

Product Description

The lightweight, easy to maneuver guide bar for occasional woodcutters using small electric and gasoline powered chain saws.

Product Details

  • Reversible for longer life
  • Better control, less kickback
  • Pitch: 3/8" low profile, Gauge: .050", chain drive link count: 40
  • Fits Craftsman, Homelite, Poulan and others, for additional fit information please see the part finder.
  • WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Color Medium Grey
Volume 208.801 in³
Product UOM Each
Weight (with Packaging) 0.833 Lb

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

PP610

151.74931, 358.34094, 358.34101, 358.34102, 358.34104, 358.34106, 358.34108, 358.34109, 358.34110, 358.34111, 358.34114, 358.34115, 358.34116, 358.34117, 358.34118, 358.3412, 358.34124, 358.34150, 358.34180, 358.34181, 358.34190, 358.34195, 358.3425, 358.3476, 358.35006, 358.35008, 358.35018, 358.35024, 358.35026, 358.35027, 358.35028, 358.35036, 358.35037, 358.35038, 358.35044, 358.35046, 358.35048, 358.35056, 358.35058, 358.35060, 358.35066, 358.35067, 358.35080, 358.35081, 358.35082, 358.35083, 358.35087, 358.35088, 358.35093, 358.35099,
358.35104, 358.35106, 358.35108, 358.35114, 358.35115, 358.35116, 358.35117, 358.35118, 358.35134, 358.35136, 358.35138, 358.35144, 358.35145, 358.35146, 358.35148, 358.35156, 358.35158, 358.35160, 358.35161, 358.35170, 358.35171, 358.35180, 358.35181, 358.35182, 358.35190, 358.35198, 358.35202, 358.35203, 358.35205, 358.35206, 358.35207, 358.35211, 358.35215, 358.35216, 358.35218, 358.35231, 358.35232, 358.35235, 358.35236, 358.35238, 358.35263, 358.35266, 358.35267, 358.35268, 358.35269, 358.35270, 358.35273, 358.35280, 358.35281, 358.35283, 358.35363, 358.35366, 358.35367, 358.35504, 358.35505, 358.35506, 358.35508, 358.35512, 358.35514, 358.35515, 358.35516, 358.35624, 358.35718, 358.35723, 358.35736, 358.35802, 358.36010, 358.36012, 358.36013, 358.36015, 358.36017, 358.36018, 358.36028, 358.36036, 358.36038, 358.36068, 358.36069, 358.36080, 358.36082, 358.36083, 358.36085, 358.36087, 358.36088, 358.36218, 358.38160, 358.38170, 38170, 944.41801, CMXGJAMD25SPS

CPS40110, LCS32010, LPS4210, PS40010, PS43010

CS-271, CS-271T, PAS-266, PPF-225, PPF-2620, PPF-280, PPT-2620, PPT-2620H, PPT-265, PPT-265H, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280

7A 2-in-1 Pole Saw 20062

MCV31T

1220, 1420, 1425, 1625, 1630, 180, 1800, 190, 1900, 1900 LE, 1950, 1950 LE, 1975, 1975 LE, 200, 2000, 2025, 205, 2050, 2055, 2055 LE, 2075, 2075C, 210, 2100, 2150, 2155, 2160, 2175, 220, 221, 222, 225, 2250, 2250 LE, 230, 2300, 235, 2350, 236, 2375, 2375 LE, 240, 2400, 2450, 250, 2500, 255, 2550, 2550 LE,
2555, 25A, 260, 2600, 262, 3314, 3316 LE, 3416, 3516, 3516AVX, 3816, 3816 AV, 3818, 400E, 4018, 4218, 4218A, 4218AV, 4218AVX, 967607201, E14E, E16E, ES 350, ES400, Electric Models, Micro 25(XX Series and XXV Series), P3314, P3816, PATRIOT 1900, PPB1634, PPB1838, PPR4218A, PR4218, S23, S25, S25AV, S25CVA, S25D, S25DA, S35, WILD THING, Woodshark

RM1035P

S1634, S1838

SWJ803E

TPS-200 Pole Saw Attachment, TPS-210 Pole Saw, TPS-250, TPS-2501, TPS-250PF, TPS-2510, TPS-260PF, TPS-270, TPS-270PF, TPS-270S

51100, 51140

TBCS57

40421

WG309

Related Products

Grease Gun

Grease Gun

Ideal for occasional users this single-use grease gun reduces friction and enhance performance in a variety of chainsaw applications.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review
Rating
Back To Top