Rim Sprocket, 404-7 Standard 7

$7.39

Out of Stock

Quick Links:

Rims provide smoother cutting and less chain wear than spur sprockets.

Product Details

Pitch: .404", Size: Standard 7 Spline, Tooth Count: 7
Radial port design uses centrifugal force to hrow off sawdust and debris
Wear-depth indicators show when it's time to replace
For best performance, replace every two chain loops
WARNING: This product can expose you to Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Sprocket
Sprocket Type	Rim
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Sprocket Tooth Count Sprocket Tooth Count Your saw may be compatible with various drive sprockets. If this is the case, a smaller tooth-count will deliver more speed, while a larger tooth-count will deliver more torque (useful on smaller saws). Tooth-count may also influence the drive link count on replacement chain.	7
Radial Port Included	Yes
Rims Included	No
Wear Indicator	Yes
Bearing included	No
Spline Size	SD7

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com

Average Customer Rating

Be the first to review this product.

Indicates required field

Review Title

Review Description

Rating

Your Name (Optional)