Skip to content Skip to navigation menu
Loading...

PowerSharp® Conversion Kit, 16"

Part #541656

PowerSharp® Conversion Kit, 16"

Part #541656

$45.99

Added to Your Shopping Cart
Bar/Chain Combos
Product Family PowerSharp®
Chain Type 91PS
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.

3/8" Low Profile™
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.

0.05"
Bar Length 16"
Drive Links
?
56
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
Tail Mount A041

Specifications, Details & Support

Product Description

Now you can sharpen fast, easy, and on the saw with the PowerSharp® system. Includes the 91PS PowerSharp chain; a guide bar designed for PowerSharp; and the PowerSharp bar-mount sharpener. Go from dull to sharp in just three seconds.

Product Details

  • Pitch: 3/8" Low Profile™, gauge: .050", drive link count: 56
  • Fast, Easy, Portable, Precise, Tough
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • For saw sizes up to 42 cc
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • WARNING: This product can expose you to Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Volume 243.67 in3
Product UOM Each
Weight (with Packaging) 2.77 Lb
Support
Powersharp® Notice

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com
Fit Guide
2Z753, 2Z760, 65, 75
67255
358.3407, 358.34094, 358.34101, 358.34102, 358.34104, 358.34106, 358.34108, 358.34109, 358.3411, 358.34114, 358.34115, 358.34117, 358.34118, 358.3412, 358.34124, 358.3415, 358.34150, 358.34180, 358.34181, 358.34190, 358.34195, 358.3445, 358.3455, 358.3476, 358.35006, 358.35008, 358.35018, 358.35024, 358.35026, 358.35027, 358.35028, 358.35036, 358.35037, 358.35044, 358.35056, 358.35058, 358.35060, 358.35066, 358.35067, 358.35080, 358.35081, 358.35082, 358.35083, 358.35087, 358.35088, 358.35091, 358.35093, 358.35095, 358.35096, 358.35099,
358.35104, 358.35106, 358.35108, 358.35114, 358.35116, 358.35117, 358.35118, 358.35134, 358.35136, 358.35138, 358.35144, 358.35145, 358.35146, 358.35148, 358.35156, 358.35158, 358.35160, 358.35161, 358.35170, 358.35171, 358.35180, 358.35181, 358.35182, 358.35190, 358.35198, 358.35202, 358.35203, 358.35205, 358.35206, 358.35207, 358.35209, 358.35211, 358.35215, 358.35216, 358.35218, 358.35224, 358.35231, 358.35235, 358.35238, 358.35263, 358.35266, 358.35267, 358.35268, 358.35269, 358.35270, 358.35273, 358.35280, 358.35281, 358.35283, 358.35363, 358.35366, 358.35367, 358.35504, 358.35505, 358.35506, 358.35508, 358.35512, 358.35514, 358.35516, 358.35624, 358.35718, 358.35723, 358.35736, 358.35802, 358.36010, 358.36012, 358.36013, 358.36015, 358.36017, 358.36018, 358.36028, 358.36036, 358.36068, 358.36069, 358.36080, 358.36082, 358.36083, 358.36085, 358.36087, 358.36088, 358.36218, 944.41801, C944.41136, C944.41137, C944.41437, C944.41845 ELECTRIC
2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573, 6Z284, 6Z823
100, 100 SUPER, 101, 102, 103, 104, 105, 106, 108, 285, 295, ES-140, ES-151A, ES-152A, ES-160, ES-1600, ES-161, ES-161A, ES-162A, ES-171, ES-171A, ES-172A, ES-173, ES-173A, ES-1800, ES-3, ES-30, ES-35, HOBBY, PS-3, PS-32, PS-33, PS-330, PS-3300TH, PS-34, PS-340, PS-3400TH, PS-341, PS-3410TH, PS-3410TH TLC, PS-344, PS-35, PS-350, PS-400, PS-401, PS-420, PS-45
CS-2000, CS-280, CS-2800, CS-285EVL, CS-290, CS-2900, CS-300, CS-3000, CS-300EVL, CS-301, CS-302, CS-302S, CS-303T, CS-304VL, CS-305, CS-3050, CS-306, CS-310, CS-315, CS-320EVL, CS-328, CS-330, CS-330EVL, CS-330MX4, CS-330T, CS-340, CS-3400, CS-341, CS-345, CS-3450, CS-346, CS-351, CS-351(after #0112195), CS-351VL, CS-352, CS-355T, CS-360T, CS-361P, CS-370, CS-370T, CS-400, E155, ECS-2000, ECS-3000
132S, MT 4100 SP
7100, 7200, 7400
CS33EB
(200 DEERE), (230 DEERE), 1035 SABER, 20, 20AV, 23, 23AV, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, BANDIT BCS35, BR TOP, PS 30, PS33, PS3316, Ranger, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10532, UT10540, UT10542, UT10544, UT10546, UT10548, UT10560, UT10562, UT10564, UT10566, UT10568, UT10580, UT10582, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10853, UT10901, UT10901A, UT10918,
UT10926, UT10947A, UT10947D, UT10947E, UT43100, UT43120, ZR10540, ZR10560, ZR10580, ZR10901, ZR10901A, ZR10947, ZR10947A, ZR10947D, ZR43100, d 3300, d3300, d3350b, d3850, d3850, d3850b, i3350b, z3850
23, 235, 235E, 240E, 243, 249, EL16, Electric 16
200CS, 230CS, 25EV, 28, 28V, 30, 30V, 35, 35EV, 40V, CS36, CS36LE, CS40, CS40LE, CS40V
2014, 2014EL, 2016, 2016EL, 2033, 2035, 2115EL, 2118EL, 2135, 2137, 2138, CS 2135, CS 2137, CS 2138, CS 2234, CS 2238S
5012B, 5014NB, 5016NB, DCS 34, DCS330H, DCS330S, DCS330TH, DCS340, DCS341, DCS3416, DCS390, DCS390S, DCS400, DCS401, EA3200S, EA3201S, EA3201S35B, EA3201S40B, EA3500S, EA3500SRDB, EA3501S, UC3030A, UC3500, UC3530A, UC4000, UC4030A, US4000
54-5659, 54-5661, 54-5662, 54-5663, 54-5713 post Apr 99, 54-5721 post Apr 99, 54-5724 post Apr 99, 54-5726 post Apr 99
EB 356a, EB 358a, EBC1840DK, MC3516, MC4218AV, MCC1435A, MCC1635A, MCC1840B, MS 354a, MS 4016, MS 4016P, MS 4018, MS 4018P, MXC1840D, MXC1840DK, Mac Cat 438
1220, 1420, 1425, 1625, 1630, 1634, 180, 1800, 1838, 190, 1900, 1900 LE, 1950, 1950 LE, 1975, 1975 LE, 200, 2000, 2025, 205, 2050, 2055, 2055 LE, 2075, 2075C, 210, 2100, 2150, 2155, 2155 PLUS, 2160, 2175, 2200, 221, 222, 225, 2250, 2250 LE, 230, 2300, 235, 2350, 236, 2375, 2375 LE, 240, 2400, 2450, 250, 2500,
2550, 2550 LE, 2555, 25A, 260, 2600, 262, 3314, 3314 Woodshark, 3316LE, 3416, 3516, 3516AVX, 3816, 3816 AV, 3818, 400E, 4018, 4218, 4218A, 4218AV, 4218AVX, E14E, E16E, ELECTRIC PRO 400E, ES 350, ES400, Electric Models, Micro 25(XX Series and XXV Series), PATRIOT 1900, PP3516AVX, PPB1634, PPB1838, PPB3416, PR3816, S23, S25, S25AV, S25CVA, S25D, S25DA, S35, SUPER 23, SUPER 25, WEEDEATER, WILDTHING, Woodshark
190500, 190501, 190555
G250, G2500, G2500TS, G300AVS, G300TS, G3100, G3100TS, G310TS, G3200EZ, G3300, G3300E, G3300EZ, G3800, G3800AVS, G3Z3500T, GZ3500T, GZ400, GZ4000
RY43006
1620, 1622, 1624, 1631 Type 3, 1634, 1635, 1636
S1634, S1838
ECS-290, ECS-300, ECS-301, ECS-302, ECS-303, ECS-320, ECS-330, ECS-3301, ECS-3351, ECS-3401, ECS-35, ECS-350, ECS-3500, ECS-3500B, ECS-351, ECS-355, ECS-356, ECS-35B, ECS-370, ECS-405, TCS 33EB, TCS 3401, TCS-3301-PFS, TCS-3351-PFS
51100, 51140
3814

Related Products

Bar and Chain Lube, 1 Qt

Bar and Chain Lube, 1 Qt

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.
Learn More
Black Apron Chaps, Size 40

Black Apron Chaps, Size 40

Comfortable protection for your legs while logging or using your chainsaw in apron chaps design, with 8 layers breathable warp knit chainsaw protection.
Learn More
Chain Saw Gloves

Chain Saw Gloves

Chainsaw gloves with left-hand saw protection
Learn More
PowerSharp® Chain and Stone, 16"

PowerSharp® Chain and Stone, 16"

Now you can sharpen fast, easy, and on the saw with the PowerSharp® system. Go from dull to sharp in just three seconds with this easy-to sharpening system. A simple attachment lets you sharpen your chain in three easy steps.
Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field