Skip to content Skip to navigation menu
Loading...

AdvanceCut™ Saw Chain, 14"

Part# S52

This product is only available through retailers or servicing dealers.

The Oregon S52 AdvanceCut™ Saw Chain is for homeowners and occasional users who want a low-vibration and low-kickback saw chain. The Chamfer Chisel cutters' twin cutting corners offer outstanding performance. These cutters are durable, easy to maintain and forgiving. This chain fits several saws including Husqvarna® 136, 137, 142, 23 and 235 E.

Product Details

  • Pitch: 3/8" Low Profile™, gauge: .050", drive link count: 52
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • For saw sizes up to 42 cc
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.

Specifications, Details & Support

Saw Chain
Product Family AdvanceCut™
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
3/8" Low Profile™
Chain Type 91PX
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
?
52
Bar Length 14"
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
Narrow Kerf No
File Size 5/32"
Package Type Loop
General
Volume 421.942 in³
Product UOM Each
Weight (with Packaging) 0.48 Lb
Support
Low kickback Saw Chain Warning

Model Fit Guide and Parts Cross Reference

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

2Z753, 2Z760, 65, 75

7953 Electric

67255

172.740500, 315.34071, 315.3411, 315.3460, 315.3461, 358.34094, 358.34101, 358.34102, 358.34104, 358.34106, 358.34108, 358.34109, 358.34110, 358.34111, 358.34114, 358.34115, 358.34116, 358.34117, 358.34118, 358.3412, 358.34124, 358.34180, 358.34181, 358.34190, 358.34195, 358.3425, 358.3476, 358.35006, 358.35008, 358.35018, 358.35024, 358.35026, 358.35027, 358.35028, 358.35036, 358.35037, 358.35038, 358.35044, 358.35046, 358.35048, 358.35056, 358.35058, 358.35060, 358.35066, 358.35067, 358.35080, 358.35081, 358.35082, 358.35083, 358.35087,
358.35088, 358.35093,
Craftsman - 358.35094
For use with Aftermarket guide bars.
358.35094, 358.35099, 358.35104, 358.35106, 358.35108, 358.35114, 358.35115, 358.35116, 358.35117, 358.35118, 358.35134, 358.35136, 358.35138, 358.35144, 358.35145, 358.35146, 358.35148, 358.35156, 358.35158, 358.35160, 358.35161, 358.35170, 358.35171, 358.35180, 358.35181, 358.35182, 358.35190, 358.35198, 358.35202, 358.35203, 358.35205, 358.35206, 358.35207,
Craftsman - 358.35211
For use with Aftermarket guide bars.
358.35211, 358.35215, 358.35216, 358.35218, 358.35231, 358.35235, 358.35236, 358.35263, 358.35266, 358.35267, 358.35268, 358.35269, 358.35270, 358.35273, 358.35280, 358.35281, 358.35283, 358.35363, 358.35366, 358.35367, 358.35504, 358.35505, 358.35506, 358.35508, 358.35512, 358.35514, 358.35516, 358.35624, 358.35718, 358.35723, 358.35736, 358.35802, 358.36010, 358.36012, 358.36013, 358.36015, 358.36017, 358.36018, 358.36026, 358.36028, 358.36036, 358.36038, 358.36068, 358.36069, 358.36080, 358.36082, 358.36083, 358.36085, 358.36087, 358.36088, 358.36218, 358.38160, 358.38170, 41514, 41521, 41524, 41714, 41734, 41744, 41944, 59042, 59414, 59521, 59524, 59714, 59824, 59884, 944.41801, CMECS614, CMXGSAMNN4214, S145

CS3916

2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573, 6Z284, 6Z823

ES-171, ES-173, PS-32, PS-3300TH, PS-34, PS-340, PS-341, PS-3410TH, PS-3410TH TLC, PS-3410THC, PS-35, PS-350, PS-400, PS-401, PS-420, PS-45

CS3814, CS3816, CS4116

CS30014, LCS34014, LCS35814, YT4729

CS-280, CS-290, CS-300, CS-3000, CS-301, CS-302, CS-303T, CS-305, CS-306, CS-310, CS-315, CS-330, CS-330MX4, CS-330T, CS-340, CS-3400, CS-341, CS-345, CS-3450, CS-346, CS-351, CS-352, CS-355T, CS-360T, CS-361P, CS-370, CS-370F, CS-370T, CS-400F, ECS-2000, ECS-3000, PPF-2620, PPF-280, PPT-2620, PPT-2620H, PPT-265, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280

132S, MT 3600, MT 3700, MT 3750, MT 4000, MT 4100 SP

GM10514

12A Electric 20022, 12A Electric 20232, 9A Electric 20012, 9A Electric 20222

CS33EB, CS33EB/16, CS33ET14

20, 20AV, 23, 23AV, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, PS33, Ranger, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10532, UT10540, UT10542, UT10544, UT10546, UT10548, UT10549, UT10560, UT10562, UT10564, UT10566, UT10568, UT10569, UT10580, UT10582, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10918, UT10926, UT10947A, UT10947D, UT10947E, UT10974A, UT43100,
UT43103, UT43104, UT43120, UT43122, ZR10540, ZR10560, ZR10580, ZR10901, ZR10901A, ZR10947, ZR10947A, ZR10947D, ZR43100, d3300, d3350b, d3850, d3850b, i3350b, z3850

120 Mark II, 120i, 135, 136, 137, 141, 142, 23, 235E, 240, 240E, 243, 316E, 33, 334T, 335, 336, 338XPT, 339XP, 34, 35, 36, 37, 38, 41, EL 16, EL 316, T435, T540XP

25EV, 28, 28V, 30, 30V, 35EV, 40V, CS36, CS36LE, CS40, CS40LE, CS40V, J3816

2014, 2016, 2036, 2116 EL, 2116E, 2139T, 36, 361, 365, 370, CS 2117 EL, CS 2121 EL, CS 2234, CS 2236T, CS 2238S

5012B, 5014NB, 5016NB, DCS3000, DCS330S, DCS330TH, DCS34, DCS340, DCS341, DCS3416, DCS3500, DCS3501, DCS390S, DCS400, DCS401, DCS4300, DCS4301, DUC353, EA3200S, EA3200SRBB, EA3201S, EA3201S35B, EA3201S40B, EA3500S, EA3500SRDB, EA3501S, EA3501S40B, EA4300F40B, UC3030A, UC3050A, UC3051A, UC3530A, UC3550A, UC3551A, UC4000, UC4030A, UC4050A, UC4051A, UC4550A, UC4551A, XCU03, XCU04

MCV31R

54-5659, 54-5661, 54-5662, 54-5663, 54-5712 post Apr 99, 54-5720 post Apr 99

CS 340, CS 380, EB 356, EB 358, EBC1840DK, MC3516, MC4218AV, MCC1435A, MCC1635A, MCC1840B, MS 354a, MS 4016, MS 4018, MXC1840D, MXC1840DK, Mac Cat 438

1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 330, 350, 365, Mini P, Mini PII, Mini PIII, SPARTAN

P-10, P-12

1220, 1420, 1425, 1625, 1630, 180, 1800, 190, 1900, 1950, 1975, 200, 2000, 2025, 205, 2050, 2055, 2075, 210, 2150, 2155, 2160, 2175, 220, 2200, 221, 222, 225, 2250, 2300, 235, 2350, 236, 2375, 240, 2400, 2450, 250, 2500, 255, 2550, 2555, 260, 2600, 262, 3314 Woodshark, 3416, 3516, 3516AVX, 3816,
400E, 4018, 4218, 4218A, 4218AVX, 967607201, E14E, E16E, ELECTRIC PRO 400E, ES400, Micro 25 XX Series, Micro 25 XXV Series, P3314, P3816, PATRIOT 1900, PL3314, PL914, PPR4218A, PR4218, S23, S25, Super Micro 25 XX Series, Super Micro 25 XXV Series, WILDTHING, Woodshark

PK4014, PK401418

190500, 190501, 190555

GZ360

M15012US, M15014AS, M15014US, M30016AS, M30016AS-1, M30016AW, M30016US, M35016AS, M35016AW, M35016US, RM1415M, RM1630A, RM1630U, RM1630W

RY3714, RY40503, RY40530, RY43006

100, 110, 120, 140, 150, 160, 305s, 326T, 358Ts, 90

1600, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 1620, 1622, 1624, 1634, 1635, 1636, 1700, 1705, 1712, 605, 606 Electric

600, 605, 606, 630, 633, 635, 636, 640

SWJ699E, SWJ701E

TCS3301PFS, TCS3351PFS, TCS33EB/14, TCS33EB/16, TCS33EDTP

51100, 51140

3814, 4014

1800, 2000, 525 DA, AV14 (Electric), AV16 (Electric), CAT 17 (Electric), WIZ/010, WIZ/012, WIZ/014, WIZ/110, WIZ/112, WIZ/212, WIZ/214, WIZ/316

WG305, WG305.1

10A Electric, 11A Electric, 9A Electric

Replacement Guide

531300372, H37-52

Y52

3636 005 0052, 63PM352E

CL15052TL2, S52

Related Products

Saw Chain Sharpening Kit, 5/32"

Saw Chain Sharpening Kit, 5/32"

Saw chain sharpening kit with all the necessary components for maintaining the chain including one assembled 5/32" file guide, two wooden file handles, one 5/32" round file, one flat file and one .025" drop-center depth gauge tool.

Learn More
Oregon SureSharp 12V Handheld Saw Chain Sharpener

Oregon SureSharp 12V Handheld Saw Chain Sharpener

Ideal for occasional chain saw users, this durable and economical tool makes hand sharpening easy.

Learn More
Bar and Chain Lube, 1 Qt

Bar and Chain Lube, 1 Qt

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More
Black Apron Chaps, Size 40

Black Apron Chaps, Size 40

Comfortable protection for your legs while logging or using your chainsaw in apron chaps design, with 8 layers breathable warp knit chainsaw protection.

Learn More
Chain Saw Gloves

Chain Saw Gloves

Chainsaw gloves with left-hand saw protection

Learn More

Other Products from Oregon

PowerSharp® Conversion Kit, 14"

PowerSharp® Conversion Kit, 14"

Now you can sharpen fast, easy, and on the saw with the PowerSharp® system. Includes the 91PS PowerSharp chain; a guide bar designed for PowerSharp; and the PowerSharp bar-mount sharpener. Go from dull to sharp in just three seconds.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field

Rating
Back To Top