Skip to content Skip to navigation menu

AdvanceCut™ Saw Chain, 16"

Part# D60

This product is only available through retailers or servicing dealers.

The D60 AdvanceCut™ Saw Chain is the ideal low kickback chain for occasional and commercial chainsaw users. The low-vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge. This 16" chain fits popular Husqvarna®, Stihl®, Echo®, and other popular chainsaws.

Product Details

  • Pitch: 3/8", gauge: .050", drive link count: 60
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • Top-Plate Filing Indicators make accurate sharpening easier
  • Exclusive OCS-01 Steel provides greater durability
  • For saw sizes 50-100 cc
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.

Specifications, Details & Support

Saw Chain
Product Family AdvanceCut™


Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
Chain Type 72V


Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
Drive Links
Bar Length 16"
Chain Low Kickback (ANSI)

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Narrow Kerf No
File Size 7/32"
Package Type Loop
Volume 438.517 in³
Product UOM Each
Weight (with Packaging) 0.755 Lb
Low kickback Saw Chain Warning

Model Fit Guide and Parts Cross Reference

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at

Fit Guide

195, 295, 2Z462A, 4Z251A, 95

358.35212, 358.35483, 358.35487, 358.35608, 358.35609, 358.35690, 358.35885, 358.35887, 358.35889, 41466, 59616, 59924, 59930

2Z462, 2Z462A, 2Z463, 2Z561, 2Z971, 4Z251, 4Z251A, 4Z252, 4Z397, 4Z973, 6Z826, 7Z627

CS-451, CS-452, CS-500EVL, CS-501EVL, CS-510EVL, CS-550EVL, CS-590, CS-60, CS-600P, CS-601, CS-602, CS-60S, CS-620P, CS-620PW, CS-650, CS-650EVL, CS-660, CS-670, CS-6700, CS-680, CS-701, CS-702, CS-706, CS-750, CS-750EVL, CS-8000, CS500, CST-610

181, MT 6500, MT 7200, MT 8200

330, 350, 35SL, 360, 410, 450, 460, 540, 550, 650, 750, 825, 850, 922, 923, 925, C Series, SXL 922, SXL 923, SXL 925, Super XL, Super XL-AO, VI-955, XL 900 Series, XL-12, XL-15, XL-400, XL-700 Series, XL-800 Series

1100, 160, 162, 181, 185, 2100, 254, 257, 260, 261, 262, 266, 268, 272, 281, 285, 288, 357XP, 357XPG, 359, 359E-TECH, 360, 362 XP, 365, 371, 380, 385XP, 394, 395XP, 395XPG, 395XPW, 455 RANCHER, 460, 465 Rancher, 480, 51, 55, 55 Rancher, 555, 562XP, 562XPG, 565, 565, 57, 570, 572XP, 572XPG, 575XP, 575XPG, 575XPW,
61, 62, 65, SS77

50AV, 50V, 51SV, 55SV, 55V, 60V, 65, 66SV, 70V, 80EV

1020, 110, 111, 60, 601, 61, 62, 621, 66, 70, 75, 751, 77, 80, 801, 81, 820, 830, 90, 910, 920, 939

DCS430, DCS431, DCS6400, EA6100PREG


10-10A, CP55, CP70, CP70L, Double Eagle 50, Double Eagle 80, Eager Beaver 3.4, Eager Beaver 3.7, MAC 1-10, MAC 10-10, MAC 2-10, MAC 4-10, MAC 5-10, MAC 7-10, Mac 3-10, Mac 6-10, Pro 10-10A, Pro Mac 55, Pro Mac 555, Pro Mac 570, Pro Mac 5700, Pro Mac 60, Pro Mac 605, Pro Mac 610, Pro Mac 650, Pro Mac 655, Pro Mac 700, Pro Mac 800, Pro Mac 805, Pro Mac 850, Silver Eagle 3420, Silver Eagle 3720, Super Pro 60, Super Pro 70, Super Pro 80, Super Pro 81, Timber Bear, Titan 50, Titan 57

250, 250A, 251, 252, 254, 260, 261, 264, 272, 280, 284, 355, 460, 461, 480, 481, 482

1655, 2055, 550, 650, 7000, F-55, F50, P100, P50, P51, P55, P65, P70, P85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65

1072, 1073, 970, P-11, P-20, P-25, P-285

203, 245, 306, 3400, 360, 361, 3700, 375, 3800, 3900, 395, 400, 4000, 405, 415, 4200, 425, 4400, 445, 450, 455, 475, 4900, 505, 5200, 5400, 5500, 6700, 6900, 7700, 8500

LOGGER, PL-4, PL-5, PL-55, SL-10, SL-11A, SL-14, SL-16, SL-4 Automatic, SL-9, SL-9 Automatic, WOODSMAN


024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 290, MS 310, MS 311, MS 391, MSE 220, MSE 250 C

3400, 430, B013, WIZARD AV18

Replacement Guide

591132360, H80-60

33RS360E, 3624 005 0060

CL85060TL2, LC60

Related Products

No Image Available

Saw Chain Sharpening Kit, 7/32"

Saw chain sharpening kit with all the necessary components for maintaining the chain including one assembled 7/32" file guide, two wooden file handles, one 7/32" round file, one flat file and one .025" drop-center depth gauge tool.

Learn More
Oregon SureSharp 12V Handheld Saw Chain Sharpener

Oregon SureSharp 12V Handheld Saw Chain Sharpener

Ideal for occasional chain saw users, this durable and economical tool makes hand sharpening easy.

Learn More
Bar and Chain Lube, 1 Qt

Bar and Chain Lube, 1 Qt

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More
Black Apron Chaps, Size 40

Black Apron Chaps, Size 40

Comfortable protection for your legs while logging or using your chainsaw in apron chaps design, with 8 layers breathable warp knit chainsaw protection.

Learn More
Chain Saw Gloves

Chain Saw Gloves

Chainsaw gloves with left-hand saw protection

Learn More

Other Products from Oregon

PowerCut™ Saw Chain, 16"

PowerCut™ Saw Chain, 16"

The Oregon E60 PowerCut™ Saw Chain is a low-vibration, 3/8" pitch chain that is ideal for professional woodcutters. The full chisel cutters offer top performance to the most demanding of users. The offset depth gauge design offers a smoother cut. This chain fits several saws including Husqvarna® 455 Rancher, 460, 465 and 55 Rancher.

Learn More


Average Customer Rating

Be the first to review this product.

Indicates required field

Back To Top