Skip to content Skip to navigation menu
Loading...

VersaCut™ Saw Chain, 16"

Part# 91VXL057G

$22.99

Added to Your Shopping Cart
Saw Chain
Product Family VersaCut™
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
3/8" Low Profile™
Chain Type 91VXL
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
?
57
Bar Length 16"
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

No
Narrow Kerf No
File Size 5/32"
Package Type Loop

Specifications, Details & Support

Product Description

The 91VXL057G Saw Chain is a high performance, 3/8" Low Profile™ Chain that is the ideal choice for arborists and orchardists who seek professional-level performance from their lightweight chainsaws. This 16", .050" gauge chain features low vibration, semi-chisel cutters which provide an aggressive cutting edge with a forgiving sharpening profile. The longer cutter top-plates increase cutting life.

Product Details

  • Pitch: 3/8" Low Profile™, gauge: .050", drive link count: 57
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • Blued Cutters deliver high-quality protection against corrosion
  • For saw sizes up to 42 cc
  • WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Product UOM Each
Weight (with Packaging) 0.442 Lb
Support
Pro Saw Chain Warning

Model Fit Guide and Parts Cross Reference

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

CS1216

7954 Electric

172.452470, 316.38070, 41AY426S793, 41AY427S799, 917.35255, CMXGSAMY426S

CS3916

Earthquake - CS3816
For use with OEM guide bars.
CS3816,
Earthquake - CS4116
For use with OEM guide bars.
CS4116

Earthwise - CS30016
For use with OEM guide bars.
CS30016,
Earthwise - CS30116
For use with OEM guide bars.
CS30116, CS33016

Echo - CS-280E
For use with OEM guide bars.
CS-280E,
Echo - CS-280EP
For use with OEM guide bars.
CS-280EP,
Echo - CS-290
For use with OEM guide bars.
CS-290,
Echo - CS-300
For use with OEM guide bars.
CS-300,
Echo - CS-3000
For use with OEM guide bars.
CS-3000,
Echo - CS-300EVL
For use with OEM guide bars.
CS-300EVL,
Echo - CS-301
For use with OEM guide bars.
CS-301, CS-302,
Echo - CS-302S
For use with OEM guide bars.
CS-302S,
Echo - CS-303T
For use with OEM guide bars.
CS-303T,
Echo - CS-305
For use with OEM guide bars.
CS-305,
Echo - CS-306
For use with OEM guide bars.
CS-306,
Echo - CS-310
For use with OEM guide bars.
CS-310,
Echo - CS-315
For use with OEM guide bars.
CS-315,
Echo - CS-330EVL
For use with OEM guide bars.
CS-330EVL,
Echo - CS-330MX4
For use with OEM guide bars.
CS-330MX4,
Echo - CS-330T
For use with OEM guide bars.
CS-330T,
Echo - CS-340
For use with OEM guide bars.
CS-340,
Echo - CS-3400
For use with OEM guide bars.
CS-3400,
Echo - CS-341
For use with OEM guide bars.
CS-341,
Echo - CS-345
For use with OEM guide bars.
CS-345,
Echo - CS-3450
For use with OEM guide bars.
CS-3450,
Echo - CS-346
For use with OEM guide bars.
CS-346,
Echo - CS-351
For use with OEM guide bars.
CS-351,
Echo - CS-352
For use with OEM guide bars.
CS-352,
Echo - CS-355T
For use with OEM guide bars.
CS-355T, CS-360,
Echo - CS-360T
For use with OEM guide bars.
CS-360T,
Echo - CS-361P
For use with OEM guide bars.
CS-361P,
Echo - CS-370
For use with OEM guide bars.
CS-370,
Echo - CS-370F
For use with OEM guide bars.
CS-370F,
Echo - CS-370T
For use with OEM guide bars.
CS-370T,
Echo - CS-400
For use with OEM guide bars.
CS-400,
Echo - CS-400F
For use with OEM guide bars.
CS-400F,
Echo - ECS-2000
For use with OEM guide bars.
ECS-2000,
Echo - ECS-3000
For use with OEM guide bars.
ECS-3000

Efco - MT 3500
For use with OEM guide bars.
MT 3500,
Efco - MT 3600
For use with OEM guide bars.
MT 3600,
Efco - MT 3700
For use with OEM guide bars.
MT 3700,
Efco - MT 3750
For use with OEM guide bars.
MT 3750,
Efco - MT 4000
For use with OEM guide bars.
MT 4000,
Efco - MT 4100 SP
For use with OEM guide bars.
MT 4100 SP

CS33EB, CS33EB/16

Homelite - UT10532
For use with OEM guide bars.
UT10532

John Deere - 200CS
For use with OEM guide bars.
200CS,
John Deere - 230CS
For use with OEM guide bars.
230CS,
John Deere - 25EV
For use with OEM guide bars.
25EV,
John Deere - 28
For use with OEM guide bars.
28,
John Deere - 28V
For use with OEM guide bars.
28V,
John Deere - 30
For use with OEM guide bars.
30,
John Deere - 30V
For use with OEM guide bars.
30V,
John Deere - 35 & 35EV
For use with OEM guide bars.
35 & 35EV,
John Deere - 40V
For use with OEM guide bars.
40V,
John Deere - CS36
For use with OEM guide bars.
CS36,
John Deere - CS36LE
For use with OEM guide bars.
CS36LE,
John Deere - CS40
For use with OEM guide bars.
CS40,
John Deere - CS40LE
For use with OEM guide bars.
CS40LE,
John Deere - CS40V
For use with OEM guide bars.
CS40V,
John Deere - J3816
For use with OEM guide bars.
J3816

41BY427S799

54-5704

6215

190556, 190558

RM4216

Shindaiwa - 100
For use with OEM guide bars.
100,
Shindaiwa - 104P
For use with OEM guide bars.
104P,
Shindaiwa - 110
For use with OEM guide bars.
110,
Shindaiwa - 120
For use with OEM guide bars.
120,
Shindaiwa - 140
For use with OEM guide bars.
140,
Shindaiwa - 150 Electrics
For use with OEM guide bars.
150 Electrics,
Shindaiwa - 160 Electrics
For use with OEM guide bars.
160 Electrics,
Shindaiwa - 180
For use with OEM guide bars.
180,
Shindaiwa - 285S
For use with OEM guide bars.
285S,
Shindaiwa - 300
For use with OEM guide bars.
300,
Shindaiwa - 300S
For use with OEM guide bars.
300S,
Shindaiwa - 326T
For use with OEM guide bars.
326T,
Shindaiwa - 340s
For use with OEM guide bars.
340s,
Shindaiwa - 345
For use with OEM guide bars.
345,
Shindaiwa - 350
For use with OEM guide bars.
350,
Shindaiwa - 352s
For use with OEM guide bars.
352s,
Shindaiwa - 357
For use with OEM guide bars.
357,
Shindaiwa - 358Ts
For use with OEM guide bars.
358Ts, 360,
Shindaiwa - 90
For use with OEM guide bars.
90,
Shindaiwa - E305AV
For use with OEM guide bars.
E305AV

1600, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 1637, 1700, 1705, 1712

SWJ700E

Tanaka - ECS-290
For use with OEM guide bars.
ECS-290,
Tanaka - ECS-300
For use with OEM guide bars.
ECS-300,
Tanaka - ECS-320
For use with OEM guide bars.
ECS-320,
Tanaka - ECS-330
For use with OEM guide bars.
ECS-330,
Tanaka - ECS-3301
For use with OEM guide bars.
ECS-3301,
Tanaka - ECS-3351
For use with OEM guide bars.
ECS-3351,
Tanaka - ECS-3401
For use with OEM guide bars.
ECS-3401,
Tanaka - ECS-35
For use with OEM guide bars.
ECS-35,
Tanaka - ECS-350
For use with OEM guide bars.
ECS-350,
Tanaka - ECS-3500
For use with OEM guide bars.
ECS-3500,
Tanaka - ECS-3500B
For use with OEM guide bars.
ECS-3500B,
Tanaka - ECS-351
For use with OEM guide bars.
ECS-351,
Tanaka - ECS-355
For use with OEM guide bars.
ECS-355,
Tanaka - ECS-356
For use with OEM guide bars.
ECS-356,
Tanaka - ECS-370
For use with OEM guide bars.
ECS-370,
Tanaka - ECS-405
For use with OEM guide bars.
ECS-405,
Tanaka - TCS 3401
For use with OEM guide bars.
TCS 3401,
Tanaka - TCS-3301-PFS
For use with OEM guide bars.
TCS-3301-PFS,
Tanaka - TCS-3351-PFS
For use with OEM guide bars.
TCS-3351-PFS,
Tanaka - TCS33EB/14
For use with OEM guide bars.
TCS33EB/14,
Tanaka - TCS33EB/16
For use with OEM guide bars.
TCS33EB/16

Wen - 4017
For use with OEM guide bars.
4017

WG300, WG303, WG304

10A Electric, 11A Electric, 12A Electric, 9A Electric

Zombi - ZCS12017
For use with OEM guide bars.
ZCS12017, ZCS5817

Replacement Guide

91PX57CQ

H35-57

3613 005 0057, 63PM57E

CL15057NSTL2

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field

Rating
Back To Top