Name: Oregon DuraMax Harvester 11BC Chipper Chain, 3/4 Pitch, 75 Drive Links (11BC075E)
SKU: 11BC075E

Oregon DuraMax Harvester 11BC Chipper Chain, 3/4 Pitch, 75 Drive Links (11BC075E)

This product is only available through retailers or servicing dealers.

Find a Local Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Reviews

Product Details

Pitch 3/4", Gauge .122", 75 Drive Links
Designed for 50" Harvester Guide Bars
Chipper Chisel cutters designed for taking larger, more aggressive bites out of the toughest wood
Chipper cutters are fabricated with fully rounded working corners and side plates for increased edge-holding durability
11BC delivers a reliable, stay-sharp performance – Every cut. Every day
Tested and proven chassis that deliver superior strength to handle the toughest Harvester applications
11BC operates best at 5/90 HP (min/max) power output
11BC operates best at 1500/7000 ft/min. power output. Recommended: 6000 ft/min.

Specifications, Details & Support

Harvester Saw Chain
Product Family	DuraMax 3/4"
Chain Type	11BC
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/4"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.122"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	75.0
Package Type	Loop
Bar Length	50"

General
Volume	222.3 in³
Product UOM	Each
Weight (with Packaging)	6.64 Lb
Net Weight Carton	6.64 Lb

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com

Product Details

Fit Guide

Hultdins