Name: Oregon 91PX AdvanceCut Saw Chain for 18 in. Bar - 61 Drive Links - fits Oregon
SKU: 91PX061G

Oregon 91PX AdvanceCut Saw Chain for 18 in. Bar - 61 Drive Links - fits Oregon

This product is only available through retailers or servicing dealers.

Shop Retailers

Quick Links:

Specifications, Details & Support Reviews

The Oregon 91PX061G is designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .050 Inch (1.3 mm) gauge, with 61 drive links. Fits chainsaw models from several brands including Oregon and More

Product Details

Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 68 drive links
Fits Oregon
Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments
For saw sizes up to 42 cc
This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.

Specifications, Details & Support

Saw Chain
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	3/8" Low Profile™
Chain Type	91P
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	61.0
Bar Length	18"
File Size	5/32"

General
Volume	0.52 dm³
Product UOM	Each
Weight (with Packaging)	0.46 Lb
Net Weight Carton	13.8 Lb

Low kickback Saw Chain Warning

Related Products

Depth Gauge Tool with Flat File

Depth gauge setting being a major factor affecting any saw chain's level of safety and performance, this depth gauge filing kit including .025" drop-center depth gauge tool and flat file helps the setting easily.

Learn More

File Guide with File, 5/32"

Assembled 5/32" file guide including one round file and one wooden handle.

Learn More

Sharpening Kit with Pouch, 5/32"

Essential for the maintenance of chain saw chains and guide bars, this complete 5/32" set provides all the tools a professional needs.

Learn More

Round Files, 5/32", 12-Pack

Premium files made with the finest steel using state-of-the-art production and finishing processes for best hand sharpening results on your saw chain.

Learn More

Round Files, 5/32 4X3 Pack

Premium files made with the finest steel using state-of-the-art production and finishing processes for best hand sharpening results on your saw chain.

Learn More