Name: Oregon 90F Polesaw Chain for 6 in. Bar - 28 Drive Links - fits Remington, Milwaukee and Craftsman
Brand: Oregon Products
SKU: 90F028G

Oregon 90F Polesaw Chain for 6 in. Bar - 28 Drive Links - fits Remington, Milwaukee and Craftsman

This product is only available through retailers or servicing dealers.

Shop Retailers Find a Local Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Reviews

The Oregon 90F028G Full House Sequence AdvanceCut Saw Chain is ideal for landscapers and homeowners using small, low powered pole saws. The .043" gauge increases efficiency since they need less power from the saw than standard gauge cutting systems. This chain fits Remington, Milwaukee and Craftsman

Product Details

Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 28 drive links
Fits Remington, Milwaukee and Craftsman
Precision, heat-treated semi-chisel chain duo cuts smoothly with a higher tolerance for debris
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments
Made in the U.S.A.
For pole saw sizes up to 42 cc

Specifications, Details & Support

Saw Chain
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	3/8" Low Profile™
Chain Type	90F
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.043"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	28.0
Bar Length	6"
File Size	5/32"

General
Product UOM	Each
Weight (with Packaging)	1.23 Lb
Net Weight Carton	0.0 Lb

Low kickback Saw Chain Warning

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com