Name: Oregon 43cm Harvester Bar, EnduraMax 0.75", 0.122" ga (431EMCT146-D64)
SKU: 431EMCT146-D64

Oregon 43cm Harvester Bar, EnduraMax 0.75

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support Reviews

Built to tackle the toughest wood in the harshest conditions, EnduraMax bars fit a broad range of harvesting equipment and are commonly used for felling and processing operations.

Product Details

Oregon Tool’s manufacturing process ensures that the EnduraMax bars perform and provide more durability and longevity than other 3/4" pitch guide bars on the market.
Specialized material is used to make sure the bars hold their original form and resist bending even during heavy use.
The bars are engineered to include precision milled grooves to resist wear and chipping on the rails.
The replaceable nose features a new strong and rigid design to increase workload efficiency with quick and easy nose replacement in the field.
The Lubritec™ oiling system allows the chain drive links and oil to have closer contact significantly reducing oil waste and reduces maintenance time.

Specifications, Details & Support

Harvester Guide Bars
Product Family	EnduraMax
Guide Bar Code	SNC
Bar Length	43"
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/4"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.122"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	64.0
Tail Mount	T146

General
Product UOM	Each
Weight (with Packaging)	0.001 Lb