ControlCut™ Guide Bar, 16"

Part# 160PXLBA074

$52.59

Find Servicing Dealer

Quantity

Added to Your Shopping Cart

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	ControlCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	62
Bar Length	16"
Tail Mount	A074
Guide Bar Code	PXLB
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	No
Bar Nose Radius	Small
Sprocket Nose Tooth Count	10

Specifications, Details & Support

Product Description

Professional lightweight guide bar designed to reduce kickback for better cutting control. Top performance for professional woodcutters.

Product Details

More precise cutting from a stiffer bar
Provides better balance on smaller saws
Lighter weight means less fatigue
Longer nose life and better performance with a new sprocket nose system
Reduced rail wear and more precise cutting via better chain fitup
Pitch: .325", Gauge: .050", chain drive link count: 62
Fits Stihl
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

General
Color	Matte Silver
Volume	56.573 in³
Product UOM	Each
Weight (with Packaging)	1.35 Lb

Light-Weight Professional Guide Bars

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

021
025
025C
70
MS 230
MS 230 C
MS 230 C-BE
MS 241 C-M
MS 250
MS 250 C
MS 250 C-BE
MS 251
MS 251 C
MS 251 C-BE

Related Products

Bar and Chain Lube, 1 Quart

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Stihl

Bar and Chain Lube, 1 Quart