AdvanceCut™ Guide Bar, 15"

Part# 150MLBK041

$38.99

Find Servicing Dealer

Quantity

Added to Your Shopping Cart

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	AdvanceCut™
Pitch ? Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge ? Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links ? Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	64
Bar Length	15"
Tail Mount	K041
Guide Bar Code	MLB
Guard Mate Compatible ? Guard Mate Compatible Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.	No
Intenz ? Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf ? Narrow Kerf Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.	Yes
Bar Nose Radius	Small
Sprocket Nose Tooth Count	10

Specifications, Details & Support

Product Description

The lightweight, durable and easy to maneuver guide bar for light commercial and occasional woodcutters using small to mid-size saws. This bar is designed especially to be used with a narrow kerf cutting system for faster, more efficent cutting.

Product Details

Multi-rivet sprocket for long nose life
Lubritec™ system keeps your chain and guide bar oiled for less friction and longer life
Better control, less kickback
Pitch: .325" Narrow Kerf, Gauge: .050", chain drive link count: 64
.325" narrow-kerf chain and bar must be used together.
Fits Craftsman, Homelite, Poulan and others, for additional fit information please see the part finder.
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

General
Color	Medium Grey
Volume	25.235 in³
Product UOM	Each
Weight (with Packaging)	1.47 Lb