AdvanceCut™ Guide Bar, 12"

Part# 120SXEA074

$33.76

Out of Stock

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8" Low Profile™
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	44
Bar Length	12"
Tail Mount	A074
Guide Bar Code	SXE
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	No
Bar Nose Radius	Small
Sprocket Nose Tooth Count	9

Specifications, Details & Support

Product Description

The lightweight, durable and easy to maneuver guide bar for light commercial and occasional woodcutters using small to mid-size saws.

Product Details

Multi-rivet sprocket for long nose life
Lubritec™ system keeps your chain and guide bar oiled for less friction and longer life
Better control, less kickback
Pitch: 3/8"low profile, Gauge: .050", chain drive link count: 44
Fits Stihl
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

General
Color	Medium Grey
Volume	18.01 in³
Product UOM	Each
Weight (with Packaging)	1.075 Lb

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

009, 009 L, 010, 011, 012, 015, 017, 018, 018 C, 019, 019T, 020, 020 Super, 020T, 021, 023, 023C, 023L, 025, 025C, 70, E 10, E 14, E 140, E180, E180C, HT 100 Pole Pruner, HT 101 Pole Pruner, HT 130 Pole Pruner, HT 131 Pole Pruner, HT 250 Pole Pruner, HT 70 Pole Pruner, HT 73 Pole Pruner, HT 75 Pole Pruner, MS 170, MS 171, MS 180, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 181, MS 181 C, MS 181 C-BE, MS 190T, MS 191T, MS 192 C, MS 192 C-E, MS 192 T, MS 192 T C-E,

MS 192 TC, MS 193, MS 193 C-E, MS 193T, MS 200, MS 200T, MS 201, MS 201 C, MS 201 C-E, MS 201 C-EM, MS 201 T, MS 201 T C-M, MS 210, MS 210 C, MS 210 C-BE, MS 211, MS 211 C, MS 211 C-BE, MS 220, MS 220 Q, MS 230, MS 230 C, MS 230 C-BE, MS 241 C-M, MS 250, MS 250 C, MS 250 C-BE, MS 251, MS 251 C, MS 251 C-BE, MSE 140, MSE 140 C, MSE 140 C-BQ, MSE 170 C-BQ, MSE 180, MSE 180 C, MSE 200, MSE 210 C-BQ

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Stihl

Grease Gun