18HX Harvester Chain, 404"

Part# 18HX087E

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Harvester Saw Chain
Product Family	Harvester
Chain Type	18HX
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	87
Package Type	Loop
Bar Length	75 CM
File Size	7/32"

Specifications, Details & Support

Product Description

Chain .404 Micro Chisel. Rugged and dependable chains that deliver reliable cutting performance under high demand of mechanized harvesting.

Product Details

Micro Chisel Cutter for excellent performance, and cutting speed
Advanced Chrome-Plating: Maximum cutter stay-sharp: holds edge in brutal conditions involving high-speed and cold weather
Oregon patented OCS-01 steel is designed to have long-lasting durability in the toughest conditions.
Thicker drive link: Wider and tougher for increased strength, increased reliabilty, longer life and less binding
LubriLink: Helps to keep oli where it's needed, on the chain, directs oil to the critical rivet flange/hole interface
18HX presets with the “gold” tie straps MUST be used with 18HX harvester chain.

General
Volume	1505.391 in³
Product UOM	Each
Weight (with Packaging)	1.625 Lb

Harvester Chain Warning

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

CAT HH 44 DE

DH550
DH550B
DP550
DT 3500
SH 600

24" GRAPPLE SAW

BUTT SAW HSD 3345
TOPPING SAW HSD-2845

EGS 600 S WIDE NOSE

380
902h
965
Felling unit 994

H 270E
H 414
HTH20 (PIERCE-PACIFIC)
HTH460-SUPER CUT (2003 & After)
HTH620 - SuperCut
HTH622-SuperCut

Other Products from Oregon

Bench Grinder, 120V

520-series saw chain grinder combines premium quality and ease of use for high volume sharpening, featuring a sharp design and an newly engineered vise for improved performance.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Caterpillar

Denharco

Hydro-Ax

Pierce Pacific

Ponsse

Rottne

Silvatec

Valmet

Waratah

Bench Grinder, 120V