This product has been discontinued. To see if there’s a substitution that meets your needs, please contact Technical Services at 800-223-5168 or use our Part Finder.
Designed for professionals who cut high volumes of wood, the Oregon 150TXLGD025 15", .325 pitch SpeedCut chain saw bar is a lighter weight bar known for its durability and best-in-class efficiency. The chainsaw bar features an aluminum core that makes it 20% lighter than an Oregon Pro-Lite bar, yet it is designed to be stiffer and stronger than other Oregon lightweight bars. Precision bar grooves allow for better fit-up and reduced wear. The built-in debris shield helps the chainsaw bar withstand tough work environments. The chainsaw bar's sprocket nose is made from bearing-grade steel, allowing it to resist spreading and wear. Our new UV paint process prevents paint from being caught in the bar groove, maintaining accurate gauge through working live. LubriTec keeps your chainsaw bar and chain oiled for less friction and longer life. See fit guide to learn which saws this works with. .325" narrow-kerf chain and bar must be used together. This chainsaw bar fits several Stihl chainsaw models including 024, 024 Super, 026, 026P, 028 Super, 029, 031, 034, 036, 026 PRO, 039, 040, and MS 260. Check the fit guide to ensure that this bar fits your saw.
Product Details
.325" narrow-kerf chain and bar must be used together.
Specifications, Details & Support
Guide Bar
Product Family
SpeedCut™
Pitch
Pitch
Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325"
Gauge
Gauge
Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
Drive Links
The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.
63.0
Bar Length
15"
Tail Mount
D025
Guide Bar Code
TXL
Guard Mate Compatible
Guard Mate Compatible
Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
No
Intenz
Intenz
Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
No
Narrow Kerf
Narrow Kerf
Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
