Name: Oregon® 19hxt semi chisel saw chain, .404, 100 ft reel
SKU: 19HXT100R

Chargement en cours...

Oregon® 19hxt semi chisel saw chain, .404, 100 ft reel

Liens rapides :

Caractéristiques, détails et support

Optimized cutter design ideal for higher horsepower machines, featuring a tall hood for improved chip clearance and heavy duty components to deliver faster speeds and enhanced operating efficiency

Détails du produit

Features exclusive OCS-O1 steel, able to resist fracture through extreme temperature changes, as well as induction-hardened rivets and heat-treated, shot-peened components for exceptional durability
Induction-hardened rivets and heat-treated, shot-peened components deliver exceptional durability
Chrome plating helps the cutting edge stay sharp for longer periods of time, which means more productivity and less maintenance.
The LubriTec™ oiling system keeps high-friction areas well lubricated to reduce wear and extend chain and bar life. Backed by a legacy of craftsmanship that began in 1947, Oregon® products set the standard for safety, quality, durability, and performance.
Backed by a legacy of craftsmanship that began in 1947, Oregon® products set the standard for safety, quality, durability, and performance

Caractéristiques, détails et support

Chaîne de scie pour abatteuse
Type de chaîne	19HXT
Pas de chaîne Pas de chaîne Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Jauge Jauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Nombre de maillons entraineurs Nombre de maillons entraineurs The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	100.0
Conditionnement	Polybag
Diamètre de lime

Général
Volume	657.34 in³
FEO du produit	Each
Poids (avec l’emballage)	16.39 kg

Retour au début