Skip to content Skip to navigation menu
Loading...

VersaCut™ Guide Bar, 15"

Part# 150VXLGK095

$44.99

Added to Your Shopping Cart
Guide Bar
Product Family VersaCut™
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325"
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
?
64
Bar Length 15"
Tail Mount K095
Guide Bar Code VXLG
Guard Mate Compatible
?

Guard Mate Compatible

Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
No
Intenz
?

Intenz

Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
No
Narrow Kerf
?

Narrow Kerf

Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
No
Bar Nose Radius Large
Sprocket Nose Tooth Count 12

Specifications, Details & Support

Product Description

Strong, lightweight guide bar designed to perform in a wide range of professional applications.

Product Details

  • More precise cutting from a stiffer bar
  • Provides better balance on smaller saws
  • Lighter weight means less fatigue
  • Longer nose life and better performance with a new sprocket nose system
  • Reduced rail wear and more precise cutting via better chain fitup
  • Pitch: .325", Gauge: .050", chain drive link count: 64
  • Fits Husqvarna and others, for additional fit information please see the part finder.
  • WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Color Silver
Product UOM Each
Weight (with Packaging) 1.901 Lb
Support
Light-Weight Professional Guide Bars

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

410, 510, 540

Related Products

Bar and Chain Lube, 1 Quart

Bar and Chain Lube, 1 Quart

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Rating
Back To Top