Skip to content Skip to navigation menu
Loading...

Start Kit, 1 Pc Powersharp PS50/14" 074

Part #541650

Start Kit, 1 Pc Powersharp PS50/14" 074

Part #541650

$45.99

Added to Your Shopping Cart
Bar/Chain Combos
Product Family PowerSharp®
Chain Type 91PS
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.

3/8" Low Profile™
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.

0.05"
Drive Links
?
50
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
Tail Mount A074
Bar Length 14"

Specifications, Details & Support

Product Details

  • Pitch: 3/8" Low Profile™, gauge: .050", drive link count: 50
  • Fast, Easy, Portable, Precise, Tough
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • For saw sizes up to 42 cc
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
General
Volume 270.516 in3
Product UOM Each
Weight (with Packaging) 2.605 Lb
Packaged Length 5.9"
Packaged Width 26.2"
Packaged Height 1.75"

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com
Fit Guide
240, 241, 244, 935, E160F(114E/116E), OL-E140F, OL-E200, OL-E300
240, 241, 244, 935, OLE 140F, OLE 300
009, 009 L, 010, 011, 012, 015, 017, 018, 018 C, 019, 019T, 020, 020 Super, 020T, 023, 023C, 023L, E 10, E 14, E 140, E180, E180C, MS 170, MS 171, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 181, MS 181 C, MS 181 C-BE, MS 190T, MS 191T, MS 192 C, MS 192 T, MS 192 TC, MS 200, MS 200T, MS 201, MS 201C, MS 201T, MS 210, MS 210 C, MS 210 C-BE, MS 211, MS 211 C, MS 211 C-BE, MS 220, MS 220 Q, MSE 140,
MSE 140 C, MSE 180, MSE 180 C, MSE 200

Related Products

Bar and Chain Lube, 1 Qt

Bar and Chain Lube, 1 Qt

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.
Learn More
Black Apron Chaps, Size 40

Black Apron Chaps, Size 40

Comfortable protection for your legs while logging or using your chainsaw in apron chaps design, with 8 layers breathable warp knit chainsaw protection.
Learn More
Chain Saw Gloves

Chain Saw Gloves

Chainsaw gloves with left-hand saw protection
Learn More
PowerSharp® Chain and Stone, 14"

PowerSharp® Chain and Stone, 14"

Now you can sharpen fast, easy, and on the saw with the PowerSharp® system. Go from dull to sharp in just three seconds with this easy-to sharpening system. A simple attachment lets you sharpen your chain in three easy steps.
Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field