SpeedCut™ Guide Bar, .325 Series, 18"

Part# 180TXLGD025

This product is only available through retailers or servicing dealers.

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	SpeedCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	74
Bar Length	18"
Tail Mount	D025
Guide Bar Code	TXLG
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	Yes
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12

Specifications, Details & Support

Product Description

The 180TXLGD025 SpeedCut guide bar is a top-performing, 18" chain saw bar compatible with several Stihl chain saw models including 024, 024 Super, 026, 026P, and 028 Super. Check the Fit Guide to see if this bar works with your saw. SpeedCut's narrow kerf system requires less power, resulting in faster cuts. This guide bar is lighter, stiffer and stronger than our other light weight bars. The debris shield increases the bar's durability in difficult work environments. The all new bearing-grade steel sprocket nose assembly resists spreading and wear. A new UV paint process prevents paint from getting stuck in the bar groove, while maintaining accurate gauge through the working life of the saw. Precision bar grooves provide better fit-up and reduced wear. LubriTec keeps your bar and chain oiled, allowing for less friction and a longer life. This bar must be used with .325" narrow-kerf chain.

Product Details

.325" narrow-kerf chain and bar must be used together.

General
Color	Medium Grey
Product UOM	Each
Weight (with Packaging)	2.15 Lb