SpeedCut™ Guide Bar, .325" Series, 16"

Part# 160TXLGK095

This product is only available through retailers or servicing dealers.

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	SpeedCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	66
Bar Length	16"
Tail Mount	K095
Guide Bar Code	TXLG
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	Yes
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12

Specifications, Details & Support

Product Description

The Oregon 160TXLGK095 SpeedCut guide bar is a 16", .325" pitch lightweight guide bar designed for professionals who cut large volumes of wood. SpeedCut chain saw bars are characterized by their lighter weight (20% lighter than Oregon Pro Lite bars), durability and best-in-class efficiency. Although these chain saw bars are lighter in weight, they are also designed to be stiffer and stronger than Oregon's other light-weight bars. The debris shield increases durability in tough environments. Precision bar grooves improve fit-up and reduce wear. A new UV paint process keeps paint out of the bar groove, maintaining accurate gauge throughout the life of the chainsaw bar. LubriTec keeps your chain saw's bar and chain oiled for decreased friction and longer life. The Oregon 160TXLGK095 SpeedCut chain saw bar works with chain saws manufactured by Husqvarna, John Deere, Jonsered, Makita, Maruyama, McCulloch, Craftsman, Poulan, Dolmar, Stanley, Olympyk, Tanaka, Troy-Bilt, Alpina, Fairmount Hydraulic, GIO, Partner, Pioneer, Red Max, and Solo. Consult the fit guide to make sure this bar works with your saw.

Product Details

.325" narrow-kerf chain and bar must be used together.

General
Color	Medium Grey
Product UOM	Each
Weight (with Packaging)	1.72 Lb