SpeedCut™ Guide Bar, 13"

Part# 130TXLBD025

This product is only available through retailers or servicing dealers.

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	SpeedCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	56
Bar Length	13"
Tail Mount	D025
Guide Bar Code	TXLB
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	Yes

Specifications, Details & Support

Product Description

Pairs with SpeedCut chain to create the next-generation narrow-kerf system on saws up to 55 cc displacement. Designed to deliver faster cutting and reduced weight compared to standard cutting systems.

Product Details

More precise cutting from a stiffer bar
Provides better balance on smaller saws
Lighter weight means less fatigue
Longer nose life and better performance with a new sprocket nose system
Reduced rail wear and more precise cutting via better chain fitup
Pitch: .325" Narrow Kerf, Gauge: .050", chain drive link count: 56
.325" narrow-kerf chain and bar must be used together.
Fits Stihl

General
Color	Matte Silver
Volume	53.703 in³
Product UOM	Each
Weight (with Packaging)	1.05 Lb

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

024
026
028
029
030
031
032
034
036
039
E220
MS 260
MS 261
MS 270
MS 271
MS 280
MS 290
MS 360
MS 361
MS 362
MSE 220

Related Products

Bar and Chain Lube, 1 Quart

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Stihl

Bar and Chain Lube, 1 Quart