Skip to content Skip to navigation menu
Loading...

Pro-Lite Bar, Pro-Lite, 91 Series, Intenz, 16"

Part# 160GPET041

This product is only available through retailers or servicing dealers.

Guide Bar
Product Family VersaCut™
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
3/8" Low Profile™
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.050"
Drive Links
?
56
Bar Length 16"
Tail Mount T041
Guide Bar Code GPE
Guard Mate Compatible
?

Guard Mate Compatible

Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
Yes
Intenz
?

Intenz

Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
Yes
Narrow Kerf
?

Narrow Kerf

Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
No
Bar Nose Radius Small
Sprocket Nose Tooth Count 9

Specifications, Details & Support

Product Description

The Oregon 160GPET041 16 inch, 3/8" Low Profile™ Pro-Lite Guide Bar is designed to offer professional woodcutters with the best combination of value and durability, The guide bar features a slim contour which makes it easy to maneuver. The super-tough chrome-moly steel body resists wear and chipping.

Product Details

  • Chainsaws originally equipped with an Intenz® bar, do not have a “bar-adjustment pin” for tensioning the chain. Use ONLY an Intenz® bar when replacing the guide bar on these saws. 
General
Color Medium Grey
Volume 21.63 in³
Product UOM Each
Weight (with Packaging) 1.43 Lb

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

Allis Chalmers - 2Z753
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2Z753,
Allis Chalmers - 2Z760
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2Z760,
Allis Chalmers - 65
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
65,
Allis Chalmers - 75
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
75

Blue Max - 7954 Electric
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
7954 Electric

Chicago - 67255
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
67255

Craftsman - 35256
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
35256,
Craftsman - 358.34094
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34094,
Craftsman - 358.34101
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34101,
Craftsman - 358.34102
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34102,
Craftsman - 358.34104
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34104,
Craftsman - 358.34106
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34106,
Craftsman - 358.34108
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34108,
Craftsman - 358.34109
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34109,
Craftsman - 358.34110
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34110,
Craftsman - 358.34111
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34111,
Craftsman - 358.34114
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34114,
Craftsman - 358.34115
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34115,
Craftsman - 358.34116
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34116,
Craftsman - 358.34117
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34117,
Craftsman - 358.34118
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34118,
Craftsman - 358.3412
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.3412,
Craftsman - 358.34124
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34124,
Craftsman - 358.34150
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34150,
Craftsman - 358.34180
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34180,
Craftsman - 358.34181
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34181,
Craftsman - 358.34190
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34190,
Craftsman - 358.34195
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.34195,
Craftsman - 358.3425
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.3425,
Craftsman - 358.3476
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.3476,
Craftsman - 358.35006
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35006,
Craftsman - 358.35008
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35008,
Craftsman - 358.35018
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35018,
Craftsman - 358.35024
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35024,
Craftsman - 358.35026
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35026,
Craftsman - 358.35027
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35027,
Craftsman - 358.35028
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35028,
Craftsman - 358.35036
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35036,
Craftsman - 358.35037
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35037,
Craftsman - 358.35038
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35038,
Craftsman - 358.35044
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35044,
Craftsman - 358.35046
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35046,
Craftsman - 358.35048
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35048,
Craftsman - 358.35056
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35056,
Craftsman - 358.35058
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35058,
Craftsman - 358.35060
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35060,
Craftsman - 358.35066
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35066,
Craftsman - 358.35067
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35067,
Craftsman - 358.35080
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35080,
Craftsman - 358.35081
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35081,
Craftsman - 358.35082
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35082,
Craftsman - 358.35083
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35083,
Craftsman - 358.35087
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35087,
Craftsman - 358.35088
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35088,
Craftsman - 358.35093
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35093,
Craftsman - 358.35099
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35099,
Craftsman - 358.35104
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35104,
Craftsman - 358.35106
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35106,
Craftsman - 358.35108
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35108,
Craftsman - 358.35114
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35114,
Craftsman - 358.35115
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35115,
Craftsman - 358.35116
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35116,
Craftsman - 358.35117
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35117,
Craftsman - 358.35118
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35118,
Craftsman - 358.35134
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35134,
Craftsman - 358.35136
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35136,
Craftsman - 358.35138
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35138,
Craftsman - 358.35144
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35144,
Craftsman - 358.35145
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35145,
Craftsman - 358.35146
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35146,
Craftsman - 358.35148
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35148,
Craftsman - 358.35156
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35156,
Craftsman - 358.35158
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35158,
Craftsman - 358.35160
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35160,
Craftsman - 358.35161
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35161,
Craftsman - 358.35170
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35170,
Craftsman - 358.35171
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35171,
Craftsman - 358.35180
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35180,
Craftsman - 358.35181
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35181,
Craftsman - 358.35182
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35182,
Craftsman - 358.35190
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35190,
Craftsman - 358.35198
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35198,
Craftsman - 358.35202
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35202,
Craftsman - 358.35203
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35203,
Craftsman - 358.35205
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35205,
Craftsman - 358.35206
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35206,
Craftsman - 358.35207
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35207,
Craftsman - 358.35211
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35211,
Craftsman - 358.35215
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35215,
Craftsman - 358.35216
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35216,
Craftsman - 358.35218
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35218,
Craftsman - 358.35231
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35231,
Craftsman - 358.35232
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35232,
Craftsman - 358.35235
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35235,
Craftsman - 358.35236
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35236,
Craftsman - 358.35238
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35238,
Craftsman - 358.35263
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35263,
Craftsman - 358.35266
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35266,
Craftsman - 358.35267
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35267,
Craftsman - 358.35268
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35268,
Craftsman - 358.35269
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35269,
Craftsman - 358.35270
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35270,
Craftsman - 358.35273
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35273,
Craftsman - 358.35280
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35280,
Craftsman - 358.35281
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35281,
Craftsman - 358.35283
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35283,
Craftsman - 358.35363
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35363,
Craftsman - 358.35366
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35366,
Craftsman - 358.35367
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35367,
Craftsman - 358.35504
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35504,
Craftsman - 358.35505
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35505,
Craftsman - 358.35506
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35506,
Craftsman - 358.35508
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35508,
Craftsman - 358.35512
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35512,
Craftsman - 358.35514
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35514,
Craftsman - 358.35515
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35515,
Craftsman - 358.35516
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35516,
Craftsman - 358.35624
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35624,
Craftsman - 358.35718
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35718,
Craftsman - 358.35723
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35723,
Craftsman - 358.35736
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35736,
Craftsman - 358.35802
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.35802,
Craftsman - 358.36010
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36010,
Craftsman - 358.36012
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36012,
Craftsman - 358.36013
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36013,
Craftsman - 358.36015
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36015,
Craftsman - 358.36017
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36017,
Craftsman - 358.36018
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36018,
Craftsman - 358.36026
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36026,
Craftsman - 358.36028
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36028,
Craftsman - 358.36036
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36036,
Craftsman - 358.36038
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36038,
Craftsman - 358.36068
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36068,
Craftsman - 358.36069
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36069,
Craftsman - 358.36080
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36080,
Craftsman - 358.36082
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36082,
Craftsman - 358.36083
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36083,
Craftsman - 358.36085
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36085,
Craftsman - 358.36087
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36087,
Craftsman - 358.36088
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36088,
Craftsman - 358.36218
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.36218,
Craftsman - 358.38160
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.38160,
Craftsman - 358.38170
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358.38170,
Craftsman - 38170
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
38170,
Craftsman - 41136
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41136,
Craftsman - 41137
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41137,
Craftsman - 41437
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41437,
Craftsman - 41526
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41526,
Craftsman - 41616
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41616,
Craftsman - 41716
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41716,
Craftsman - 41736
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41736,
Craftsman - 41746
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41746,
Craftsman - 41845 ELECTRIC
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41845 ELECTRIC,
Craftsman - 41846
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41846,
Craftsman - 41926
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41926,
Craftsman - 41946
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41946,
Craftsman - 41950
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41950,
Craftsman - 59406
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59406,
Craftsman - 59522
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59522,
Craftsman - 59525
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59525,
Craftsman - 59526
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59526,
Craftsman - 59816
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59816,
Craftsman - 59826
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59826,
Craftsman - 59880
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59880,
Craftsman - 59883
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59883,
Craftsman - 59886
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59886,
Craftsman - 59887
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
59887,
Craftsman - 944.41801
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
944.41801

Dayton - 2Z970
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2Z970,
Dayton - 4Z022
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4Z022,
Dayton - 4Z023
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4Z023,
Dayton - 4Z109
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4Z109,
Dayton - 4Z573
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4Z573,
Dayton - 6Z284
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
6Z284,
Dayton - 6Z823
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
6Z823

Dolmar - 100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
100,
Dolmar - 101
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
101,
Dolmar - 102
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
102,
Dolmar - 103
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
103,
Dolmar - 104
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
104,
Dolmar - 105
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
105,
Dolmar - 106
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
106,
Dolmar - 108
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
108,
Dolmar - ES-161
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES-161,
Dolmar - ES-171
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES-171,
Dolmar - ES-173
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES-173,
Dolmar - ES-173A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES-173A,
Dolmar - PS-32
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-32,
Dolmar - PS-3300TH
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-3300TH,
Dolmar - PS-34
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-34,
Dolmar - PS-340
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-340,
Dolmar - PS-341
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-341,
Dolmar - PS-3410TH
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-3410TH,
Dolmar - PS-3410TH TLC
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-3410TH TLC,
Dolmar - PS-35
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-35,
Dolmar - PS-350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-350,
Dolmar - PS-351
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-351,
Dolmar - PS-400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-400,
Dolmar - PS-401
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-401,
Dolmar - PS-420
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-420,
Dolmar - PS-421
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-421,
Dolmar - PS-45
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS-45

Earthquake - CS3816
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS3816,
Earthquake - CS4116
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS4116

Earthwise - CS30016
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS30016,
Earthwise - CS30116
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS30116

Echo - CS-2000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-2000,
Echo - CS-280
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-280,
Echo - CS-2800
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-2800,
Echo - CS-280E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-280E,
Echo - CS-280EP
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-280EP,
Echo - CS-285EVL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-285EVL,
Echo - CS-290
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-290,
Echo - CS-2900
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-2900,
Echo - CS-300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-300,
Echo - CS-3000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-3000,
Echo - CS-300EVL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-300EVL,
Echo - CS-301
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-301,
Echo - CS-302
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-302,
Echo - CS-302S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-302S,
Echo - CS-303T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-303T,
Echo - CS-304VL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-304VL,
Echo - CS-305
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-305,
Echo - CS-3050
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-3050,
Echo - CS-306
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-306,
Echo - CS-310
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-310,
Echo - CS-315
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-315,
Echo - CS-320EVL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-320EVL,
Echo - CS-328
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-328,
Echo - CS-330
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-330,
Echo - CS-330EVL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-330EVL,
Echo - CS-330MX4
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-330MX4,
Echo - CS-330T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-330T,
Echo - CS-340
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-340,
Echo - CS-3400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-3400,
Echo - CS-341
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-341,
Echo - CS-345
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-345,
Echo - CS-3450
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-3450,
Echo - CS-346
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-346,
Echo - CS-351
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-351,
Echo - CS-351(after #0112195)
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-351(after #0112195),
Echo - CS-351VL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-351VL,
Echo - CS-352
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-352,
Echo - CS-355T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-355T,
Echo - CS-360
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-360,
Echo - CS-360EVL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-360EVL,
Echo - CS-360T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-360T,
Echo - CS-361P
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-361P,
Echo - CS-370
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-370,
Echo - CS-370F
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-370F,
Echo - CS-370T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-370T,
Echo - CS-400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-400,
Echo - CS-400F
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS-400F,
Echo - E155
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
E155,
Echo - ECS-2000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-2000,
Echo - ECS-3000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3000

Efco - MT 3600
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MT 3600,
Efco - MT 3700
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MT 3700,
Efco - MT 3750
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MT 3750,
Efco - MT 4000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MT 4000,
Efco - MT 4100 SP
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MT 4100 SP

Green Machine - 7100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
7100,
Green Machine - 7200
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
7200,
Green Machine - 7400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
7400

Greenworks - 12A Electric 20022
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
12A Electric 20022,
Greenworks - 12A Electric 20232
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
12A Electric 20232

Hitachi - CS33EB
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS33EB,
Hitachi - CS33EB/16
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS33EB/16

Homelite - (200 DEERE)
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
(200 DEERE),
Homelite - (230 DEERE)
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
(230 DEERE),
Homelite - 1035 SABER
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1035 SABER,
Homelite - 20
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
20,
Homelite - 20AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
20AV,
Homelite - 23
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
23,
Homelite - 23AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
23AV,
Homelite - 27
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
27,
Homelite - 3300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3300,
Homelite - 3314
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3314,
Homelite - 3316
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3316,
Homelite - 3318
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3318,
Homelite - 3350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3350,
Homelite - 3550
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3550,
Homelite - 3800
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3800,
Homelite - 3850
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3850,
Homelite - BANDIT BCS35
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
BANDIT BCS35,
Homelite - BR TOP
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
BR TOP,
Homelite - PS 30
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS 30,
Homelite - PS33
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS33,
Homelite - PS3316
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PS3316,
Homelite - Ranger
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Ranger,
Homelite - TIMBERMAN
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TIMBERMAN,
Homelite - UT10510
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10510,
Homelite - UT10514
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10514,
Homelite - UT10516
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10516,
Homelite - UT10517
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10517,
Homelite - UT10530
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10530,
Homelite - UT10530A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10530A,
Homelite - UT10540
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10540,
Homelite - UT10542
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10542,
Homelite - UT10544
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10544,
Homelite - UT10546
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10546,
Homelite - UT10548
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10548,
Homelite - UT10549
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10549,
Homelite - UT10560
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10560,
Homelite - UT10562
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10562,
Homelite - UT10564
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10564,
Homelite - UT10566
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10566,
Homelite - UT10568
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10568,
Homelite - UT10569
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10569,
Homelite - UT10580
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10580,
Homelite - UT10582
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10582,
Homelite - UT10584
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10584,
Homelite - UT10586
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10586,
Homelite - UT10588
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10588,
Homelite - UT10589
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10589,
Homelite - UT10640
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10640,
Homelite - UT10660
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10660,
Homelite - UT10680
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10680,
Homelite - UT10853
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10853,
Homelite - UT10901
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10901,
Homelite - UT10901A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10901A,
Homelite - UT10918
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10918,
Homelite - UT10926
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10926,
Homelite - UT10947A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10947A,
Homelite - UT10947D
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10947D,
Homelite - UT10947E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10947E,
Homelite - UT10974A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT10974A,
Homelite - UT43100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43100,
Homelite - UT43102
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43102,
Homelite - UT43103
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43103,
Homelite - UT43120
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43120,
Homelite - UT43122
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43122,
Homelite - UT43123
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UT43123,
Homelite - ZR10540
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10540,
Homelite - ZR10560
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10560,
Homelite - ZR10580
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10580,
Homelite - ZR10901
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10901,
Homelite - ZR10901A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10901A,
Homelite - ZR10947
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10947,
Homelite - ZR10947A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10947A,
Homelite - ZR10947D
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR10947D,
Homelite - ZR43100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ZR43100,
Homelite - d 3300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d 3300,
Homelite - d3300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d3300,
Homelite - d3350b
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d3350b,
Homelite - d3850
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d3850,
Homelite - d3850
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d3850,
Homelite - d3850b
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
d3850b,
Homelite - i3350b
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
i3350b,
Homelite - z3850
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
z3850

Husqvarna - 136
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
136,
Husqvarna - 137
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
137,
Husqvarna - 140
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
140,
Husqvarna - 140S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
140S,
Husqvarna - 141
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
141,
Husqvarna - 142
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
142,
Husqvarna - 23
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
23,
Husqvarna - 235
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
235, 235E,
Husqvarna - 240
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
240,
Husqvarna - 240E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
240E,
Husqvarna - 243
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
243,
Husqvarna - 249
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
249,
Husqvarna - 33
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
33,
Husqvarna - 36
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
36,
Husqvarna - 38
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
38,
Husqvarna - 41
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
41,
Husqvarna - EL16
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EL16,
Husqvarna - EL316
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EL316,
Husqvarna - Electric 16
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Electric 16

John Deere - 200CS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
200CS,
John Deere - 230CS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
230CS,
John Deere - 25EV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
25EV,
John Deere - 28
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
28,
John Deere - 28V
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
28V,
John Deere - 30
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
30,
John Deere - 30V
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
30V,
John Deere - 35 & 35EV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
35 & 35EV,
John Deere - 35EV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
35EV,
John Deere - 40V
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
40V,
John Deere - CS36
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS36,
John Deere - CS36LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS36LE,
John Deere - CS40
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS40,
John Deere - CS40LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS40LE,
John Deere - CS40V
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS40V,
John Deere - J3816
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
J3816

Jonsered - 2014
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2014,
Jonsered - 2014EL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2014EL,
Jonsered - 2016
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2016,
Jonsered - 2016EL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2016EL,
Jonsered - 2033
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2033,
Jonsered - 2035
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2035,
Jonsered - 2036
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2036,
Jonsered - 2036 Turbo
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2036 Turbo,
Jonsered - 2040
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2040,
Jonsered - 2040 Turbo
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2040 Turbo,
Jonsered - 2041
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2041,
Jonsered - 2045
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2045,
Jonsered - 2050
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2050,
Jonsered - 2050 Turbo
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2050 Turbo,
Jonsered - 2054
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2054,
Jonsered - 2115EL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2115EL,
Jonsered - 2118EL
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2118EL,
Jonsered - 2135
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2135,
Jonsered - 2137
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2137,
Jonsered - 2138
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2138,
Jonsered - CS 2135
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS 2135,
Jonsered - CS 2137
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS 2137,
Jonsered - CS 2138
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS 2138,
Jonsered - CS 2234
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS 2234,
Jonsered - CS 2238S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
CS 2238S

Kobalt - KCS 180B-06
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
KCS 180B-06

Makita - 5012B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
5012B,
Makita - 5014NB
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
5014NB,
Makita - 5016NB
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
5016NB,
Makita - DCS330S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS330S,
Makita - DCS330TH
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS330TH,
Makita - DCS34
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS34,
Makita - DCS340
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS340,
Makita - DCS341
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS341,
Makita - DCS3416
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS3416,
Makita - DCS3500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS3500,
Makita - DCS3501
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS3501,
Makita - DCS390
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS390,
Makita - DCS390S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS390S,
Makita - DCS400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS400,
Makita - DCS401
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS401,
Makita - DCS4300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS4300,
Makita - DCS4301
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
DCS4301,
Makita - EA3201S35B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EA3201S35B,
Makita - EA3201S40B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EA3201S40B,
Makita - EA3501S40B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EA3501S40B,
Makita - EA4300F40B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EA4300F40B,
Makita - EA4300F45C
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EA4300F45C,
Makita - UC3030A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3030A,
Makita - UC3050A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3050A,
Makita - UC3051A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3051A,
Makita - UC3500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3500,
Makita - UC3530A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3530A,
Makita - UC3550A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3550A,
Makita - UC3551A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC3551A,
Makita - UC4000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4000,
Makita - UC4030A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4030A,
Makita - UC4050A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4050A,
Makita - UC4051A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4051A,
Makita - UC4550A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4550A,
Makita - UC4551A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
UC4551A, XCU04

Mastercraft - 54-5659
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
54-5659,
Mastercraft - 54-5661
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
54-5661,
Mastercraft - 54-5662
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
54-5662,
Mastercraft - 54-5663
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
54-5663, 54-5713 post Apr 99, 54-5721 post Apr 99, 54-5724 post Apr 99, 54-5726 post Apr 99

McCulloch - EB 356
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EB 356,
McCulloch - EB 356a
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EB 356a,
McCulloch - EB 358
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EB 358,
McCulloch - EB 358a
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EB 358a,
McCulloch - EBC1840DK
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
EBC1840DK,
McCulloch - MC3516
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MC3516,
McCulloch - MC4218AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MC4218AV,
McCulloch - MCC1435A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MCC1435A,
McCulloch - MCC1635A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MCC1635A,
McCulloch - MCC1840B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MCC1840B,
McCulloch - MS 354
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MS 354,
McCulloch - MS 354a
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MS 354a,
McCulloch - MS 4016P
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MS 4016P,
McCulloch - MS 4018P
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MS 4018P,
McCulloch - MXC1840D
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MXC1840D,
McCulloch - MXC1840DK
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
MXC1840DK,
McCulloch - Mac Cat 438
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Mac Cat 438

Poulan - 1220
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1220,
Poulan - 1420
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1420,
Poulan - 1425
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1425,
Poulan - 1625
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1625,
Poulan - 1630
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1630,
Poulan - 180
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
180,
Poulan - 1800
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1800,
Poulan - 190
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190,
Poulan - 1900
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1900,
Poulan - 1900 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1900 LE,
Poulan - 1950
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1950,
Poulan - 1950 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1950 LE,
Poulan - 1975
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1975,
Poulan - 1975 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1975 LE,
Poulan - 200
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
200,
Poulan - 2000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2000,
Poulan - 2025
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2025,
Poulan - 205
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
205,
Poulan - 2050
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2050,
Poulan - 2055
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2055,
Poulan - 2055 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2055 LE,
Poulan - 2075
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2075,
Poulan - 2075C
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2075C,
Poulan - 210
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
210,
Poulan - 2100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2100,
Poulan - 2150
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2150,
Poulan - 2155
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2155,
Poulan - 2160
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2160,
Poulan - 2175
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2175,
Poulan - 220
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
220,
Poulan - 221
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
221,
Poulan - 222
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
222,
Poulan - 225
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
225,
Poulan - 2250
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2250,
Poulan - 2250 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2250 LE,
Poulan - 230
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
230,
Poulan - 2300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2300,
Poulan - 235
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
235,
Poulan - 2350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2350,
Poulan - 236
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
236,
Poulan - 2375
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2375,
Poulan - 2375 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2375 LE,
Poulan - 240
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
240,
Poulan - 2400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2400,
Poulan - 2450
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2450,
Poulan - 250
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
250,
Poulan - 2500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2500,
Poulan - 255
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
255,
Poulan - 2550
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2550,
Poulan - 2550 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2550 LE,
Poulan - 2555
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2555,
Poulan - 25A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
25A,
Poulan - 260
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
260,
Poulan - 2600
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2600,
Poulan - 262
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
262,
Poulan - 3314
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3314,
Poulan - 3316 LE
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3316 LE,
Poulan - 3416
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3416,
Poulan - 3516
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3516,
Poulan - 3516AVX
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3516AVX,
Poulan - 3816
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3816,
Poulan - 3816 AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3816 AV,
Poulan - 3818
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3818,
Poulan - 400E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
400E,
Poulan - 4018
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4018,
Poulan - 4218
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4218,
Poulan - 4218A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4218A,
Poulan - 4218AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4218AV,
Poulan - 4218AVX
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4218AVX,
Poulan - 967607201
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
967607201,
Poulan - E14E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
E14E,
Poulan - E16E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
E16E,
Poulan - ES 350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES 350,
Poulan - ES400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ES400,
Poulan - Electric Models
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Electric Models,
Poulan - Micro 25(XX Series and XXV Series)
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Micro 25(XX Series and XXV Series),
Poulan - P3314
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
P3314,
Poulan - P3816
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
P3816,
Poulan - PATRIOT 1900
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PATRIOT 1900,
Poulan - PPB1634
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PPB1634,
Poulan - PPB1838
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PPB1838,
Poulan - PPR4218A
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PPR4218A,
Poulan - PR4016
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PR4016,
Poulan - PR4218
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
PR4218,
Poulan - S23
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S23,
Poulan - S25
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25,
Poulan - S25AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25AV,
Poulan - S25CVA
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25CVA,
Poulan - S25D
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25D,
Poulan - S25DA
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25DA,
Poulan - S35
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S35, WILD THING,
Poulan - Woodshark
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
Woodshark

Powerhorse - 190500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190500,
Powerhorse - 190501
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190501,
Powerhorse - 190555
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190555,
Powerhorse - 190556
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190556,
Powerhorse - 190558
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
190558

Red Max - G250
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G250,
Red Max - G2500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G2500,
Red Max - G2500TS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G2500TS,
Red Max - G300AVS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G300AVS,
Red Max - G300TS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G300TS,
Red Max - G3100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3100,
Red Max - G3100TS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3100TS,
Red Max - G3200EZ
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3200EZ,
Red Max - G3300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3300,
Red Max - G3300E
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3300E,
Red Max - G3300EZ
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3300EZ,
Red Max - G3800
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3800,
Red Max - G3800AVS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
G3800AVS,
Red Max - GZ3500T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
GZ3500T,
Red Max - GZ380
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
GZ380,
Red Max - GZ400
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
GZ400,
Red Max - GZ4000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
GZ4000

Ryobi - RY43006
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
RY43006

Shindaiwa - 100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
100,
Shindaiwa - 104P
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
104P,
Shindaiwa - 110
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
110,
Shindaiwa - 120
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
120,
Shindaiwa - 140
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
140,
Shindaiwa - 150 Electrics
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
150 Electrics,
Shindaiwa - 160 Electrics
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
160 Electrics,
Shindaiwa - 180
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
180,
Shindaiwa - 285S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
285S,
Shindaiwa - 300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
300,
Shindaiwa - 300S
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
300S,
Shindaiwa - 326T
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
326T,
Shindaiwa - 340s
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
340s,
Shindaiwa - 345
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
345,
Shindaiwa - 350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
350,
Shindaiwa - 352s
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
352s,
Shindaiwa - 357
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
357,
Shindaiwa - 358Ts
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
358Ts,
Shindaiwa - 360
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
360,
Shindaiwa - 90
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
90,
Shindaiwa - E305AV
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
E305AV

Skil - 1620
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1620,
Skil - 1622
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1622,
Skil - 1624
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1624,
Skil - 1631 Type 3
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1631 Type 3,
Skil - 1634
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1634,
Skil - 1635
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1635,
Skil - 1636
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1636

Snapper - S1634
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S1634,
Snapper - S1838
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S1838,
Snapper - SC60V
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
SC60V

SWJ700E, iON16CS

Sunrise - KCS 180B-06
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
KCS 180B-06

Tanaka - ECS-290
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-290,
Tanaka - ECS-300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-300,
Tanaka - ECS-320
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-320,
Tanaka - ECS-330
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-330,
Tanaka - ECS-3301
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3301,
Tanaka - ECS-3351
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3351,
Tanaka - ECS-3401
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3401,
Tanaka - ECS-35
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-35,
Tanaka - ECS-350
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-350,
Tanaka - ECS-3500
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3500,
Tanaka - ECS-3500B
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-3500B,
Tanaka - ECS-351
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-351,
Tanaka - ECS-355
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-355,
Tanaka - ECS-356
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-356,
Tanaka - ECS-370
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-370,
Tanaka - ECS-405
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
ECS-405,
Tanaka - TCS 3401
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TCS 3401,
Tanaka - TCS-3301-PFS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TCS-3301-PFS,
Tanaka - TCS-3351-PFS
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TCS-3351-PFS,
Tanaka - TCS33EB/14
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TCS33EB/14,
Tanaka - TCS33EB/16
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TCS33EB/16

Toro - 51100
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
51100,
Toro - 51140
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
51140

Troy-Bilt - TB3516CC Gas
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TB3516CC Gas,
Troy-Bilt - TB3518CC Gas
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TB3518CC Gas,
Troy-Bilt - TB4018
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
TB4018

Wen - 3814
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
3814,
Wen - 4014
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4014,
Wen - 4017
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
4017

Western Auto - 012
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
012,
Western Auto - 014
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
014,
Western Auto - 110
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
110,
Western Auto - 112
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
112,
Western Auto - 1800
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
1800,
Western Auto - 2000
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
2000,
Western Auto - 214
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
214,
Western Auto - 316
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
316,
Western Auto - AV16
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
AV16,
Western Auto - S25DA
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
S25DA

Worx - WG300
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
WG300,
Worx - WG303
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
WG303,
Worx - WG304
Chainsaws originally equipped with an Intenz bar do not have a bar adjustment pin for tensioning the chain. ONLY use an Intenz bar when replacing the guide bar on these saws. This bar accepts Guard Mate tip guards.
WG304

Reviews

Average Customer Rating

Be the first to review this product.

Rating
Back To Top