Skip to content Skip to navigation menu
Loading...

Guide Bar and Chain Combo, 18"

Part #540394

Guide Bar and Chain Combo, 18"

Part #540394

$47.99

Out of Stock

Bar/Chain Combos
Product Family AdvanceCut™
Chain Type 91PX
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.

3/8" Low Profile™
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.

.050"
Bar Length 18"
Drive Links
?
62
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
Tail Mount A041
Guide Bar Code DGE
File Size 5/32"
Bar Part Number 180DGEA041
Bar Nose Radius Small
Sprocket Nose Tooth Count 7

Specifications, Details & Support

Product Description

This 18" guide bar and chain combination features a 3/8" low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain. The Chamfer Chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving.

Product Details

  • Fits Craftsman, Echo, Poulan and others, for additional fit information please see the part finder.
  • Lubritec™ keeps your chain and guide bar oiled for less friction and longer life
  • For saw sizes up to 42 cc
  • Pitch: 3/8" low profile, Gauge: .050", chain drive link count: 62
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Volume 102.938 in³
Product UOM Each
Weight (with Packaging) 1.94 Lb

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com
Fit Guide
2Z753, 2Z760, 65, 75
CS1518
358.34094, 358.34101, 358.34102, 358.34104, 358.34106, 358.34108, 358.34109, 358.34110, 358.34111, 358.34114, 358.34115, 358.34116, 358.34117, 358.34118, 358.3412, 358.34124, 358.34150, 358.34180, 358.34181, 358.34190, 358.34195, 358.3425, 358.3476, 358.35006, 358.35008, 358.35018, 358.35024, 358.35026, 358.35027, 358.35028, 358.35036, 358.35037, 358.35038, 358.35044, 358.35046, 358.35048, 358.35056, 358.35058, 358.35060, 358.35066, 358.35067, 358.35080, 358.35081, 358.35082, 358.35083, 358.35087, 358.35088, 358.35093, 358.35099, 358.35104,
358.35106, 358.35108, 358.35114, 358.35115, 358.35116, 358.35117, 358.35118, 358.35134, 358.35136, 358.35138, 358.35144, 358.35145, 358.35146, 358.35148, 358.35156, 358.35158, 358.35160, 358.35161, 358.35170, 358.35171, 358.35180, 358.35181, 358.35182, 358.35190, 358.35198, 358.35202, 358.35203, 358.35205, 358.35206, 358.35207, 358.35211, 358.35215, 358.35216, 358.35218, 358.35231, 358.35235, 358.35236, 358.35238, 358.35263, 358.35266, 358.35267, 358.35268, 358.35269, 358.35270, 358.35273, 358.35280, 358.35281, 358.35283, 358.35363, 358.35366, 358.35367, 358.35504, 358.35505, 358.35506, 358.35508, 358.35512, 358.35514, 358.35515, 358.35516, 358.35618, 358.35623, 358.35624, 358.35718, 358.35723, 358.35736, 358.35802, 358.36010, 358.36012, 358.36013, 358.36015, 358.36017, 358.36018, 358.36028, 358.36036, 358.36038, 358.36068, 358.36069, 358.36080, 358.36082, 358.36083, 358.36085, 358.36087, 358.36088, 358.36218, 358.38160, 358.38170, 41748, 41952, 944.41801
CS3916
2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573, 6Z284, 6Z823
100, 101, 102, 103, 104, 105, 106, 108, ES-161, ES-171, ES-173, ES-173A, PS-32, PS-3300TH, PS-34, PS-340, PS-341, PS-3410TH, PS-3410TH TLC, PS-35, PS-350, PS-400, PS-401, PS-420, PS-45
CS-280E, CS-280EP, CS-290, CS-300, CS-3000, CS-300EVL, CS-301, CS-302S, CS-303T, CS-310, CS-315, CS-330EVL, CS-330MX4, CS-330T, CS-340, CS-3400, CS-341, CS-345, CS-3450, CS-346, CS-351, CS-355T, CS-360T, CS-361P, CS-370, CS-370F, CS-370T, CS-400, CS-400F, ECS-2000, ECS-3000
7100, 7200, 7400
2000002 80V, GCS80420, GCS80421
20, 20AV, 23, 23AV, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, PS33, Ranger, UT10510, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10532, UT10540, UT10542, UT10544, UT10546, UT10548, UT10549, UT10560, UT10562, UT10564, UT10566, UT10568, UT10569, UT10580, UT10582, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10918, UT10926, UT10947A, UT10947D, UT10947E, UT10974A,
UT43100, UT43102, UT43103, UT43120, UT43122, ZR10540, ZR10560, ZR10580, ZR10901, ZR10901A, ZR10947, ZR10947A, ZR10947D, ZR43100, d3300, d3350b, d3850, d3850b, i3350b, z3850
136, 137, 140, 141, 142, 23, 235, 235E, 240, 240E, 243, 249, 33, 36, 38, 41, Electric 16
200CS, 230CS, 25EV, 28, 28V, 30, 30V, 35 & 35EV, 40V, CS36, CS36LE, CS40, CS40LE, CS40V, J3816
2014, 2016, 2035, 2036, 2036 Turbo, 2040, 2040 Turbo, 2137, 2138, CS 2135, CS 2137, CS 2138, CS 2234, CS 2238S
KCS 180B-06
5012B, 5014NB, 5016NB, DCS3000, DCS330S, DCS330TH, DCS34, DCS340, DCS341, DCS3416, DCS390, DCS390S, DCS400, DCS401, EA3201S35B, EA3201S40B, EA3500S, EA3500SRDB, EA3501S, EA3501S40B, EA4300F40B, UC3030A, UC3050A, UC3051A, UC3500, UC3530A, UC3550A, UC3551A, UC4000, UC4030A, UC4050A, UC4051A, UC4550A, UC4551A
54-5722 post Apr 99
EB 356, EB 356a, EB 358, EB 358a, EBC1840DK, MC3516, MC4218AV, MCC1435A, MCC1635A, MCC1840B, MS 354, MS 354a, MS 4016, MS 4016P, MS 4018, MS 4018P, MXC1840D, MXC1840DK, Mac Cat 438
1220, 1420, 1425, 1625, 1630, 180, 1800, 190, 1900, 1900 LE, 1950, 1950 LE, 1975, 1975 LE, 200, 2000, 2025, 205, 2050, 2055, 2055 LE, 2075, 2075C, 210, 2100, 2150, 2155, 2160, 2175, 220, 221, 222, 225, 2250, 2250 LE, 230, 2300, 235, 2350, 236, 2375, 2375 LE, 240, 2400, 2450, 250, 2500, 255, 2550, 2550 LE,
2555, 25A, 260, 2600, 262, 3314, 3316 LE, 3416, 3516, 3516AVX, 3816, 3816 AV, 3818, 400E, 4018, 4218, 4218A, 4218AV, 4218AVX, 967607201, E14E, E16E, ELECTRIC PRO 400E, ES 350, ES400, Electric Models, Micro 25(XX Series and XXV Series), P3314, P3816, PATRIOT 1900, PP4218AVX, PPB1634, PPB1838, PPB4218, PPR4218A, PR4218, S23, S25, S25AV, S25CVA, S25D, S25DA, S35, WILDTHING, Woodshark
G250, G2500, G2500TS, G300AVS, G300TS, G3100, G3100TS, G3200EZ, G3300, G3300E, G3300EZ, G3800, G3800AVS, GZ3500T, GZ380, GZ400, GZ4000
RY3818, RY43006
100, 104P, 110, 120, 140, 150 Electrics, 160 Electrics, 180, 285S, 300, 300S, 326T, 345, 350, 352s, 357, 360, 402s, 90, E305AV
1620, 1622, 1624, 1631 Type 3, 1634, 1635, 1636
S1634, S1838
SWJ701E
KCS 180B-06
ECS-290, ECS-300, ECS-320, ECS-330, ECS-3301, ECS-3351, ECS-3401, ECS-35, ECS-350, ECS-3500, ECS-3500B, ECS-351, ECS-355, ECS-356, ECS-370, ECS-405, TCS 3401, TCS-3301-PFS, TCS-3351-PFS, TCS33EB/14, TCS33EB/16
TB3516CC Gas, TB3518CC Gas, TB4018
10A Electric, 11A Electric, 13A Electric, 9A Electric

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field