Skip to content Skip to navigation menu
Loading...

Guide Bar and Chain Combo, 18", Pro-Lite

Part# 105713

This product is only available through retailers or servicing dealers.

Bar/Chain Combos
Product Family ControlCut™
Chain Type 21BPX
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325"
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
.058"
Bar Length 18"
Drive Links
?
72
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
Tail Mount K095
Guide Bar Code SLG
File Size 3/16"
Bar Part Number 188SLGK095
Bar Nose Radius Large
Sprocket Nose Tooth Count 12

Specifications, Details & Support

Product Description

This 18" chain saw bar and chain combo is compatible with bar mount K095 (Dolmar, Efco, Husqvarna, Josered, Makita, Redmax). Combo includes Pro Lite chain saw bar number 183 SLG K095 and .325" pitch 21BPX chain.
General
Product UOM Each
Weight (with Packaging) 3.217 Lb
Support
Low kickback Saw Chain Warning

Model Fit Guide

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P-510, PRO-41, PRO-45, PRO-540, PRO-600

6595

316.35022, 35201

109, 110, 111, 115, 115i, PS-460, PS-510, PS-5100S, PS-5100SH, PS-5105, PS-5105H, PS-540, PS-6100, PS-6100H

147, 152, 156, 165, 956, 962, MT 5200

38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513

5200

133, 140, 1400, 140S, 154, 1600, 234, 235, 235E, 238, 240, 240E, 242, 242XP, 246, 254, 254XP, 257, 261, 262, 262XP, 33, 336, 338XPT, 339XP, 340, 340E, 340SE, 340SG, 345, 346, 346XP, 346XP E-TECH, 346XPG, 350, 351, 353, 353E-TECH, 353G E-TECH, 355, 357, 357XP, 357XPG, 359, 359E-TECH, 360, 362, 362 XP, 38, 40,
42, 435, 435E, 44, 440, 440E, 444, 445, 445E, 45, 450, 450 50th Anniversary, 450E, 455, 455 RANCHER, 455e RANCHER, 460, 460 RANCHER, 466, 49, 50, 51, 543XP, 543XPG, 545, 55, 55 Rancher, 550XP, 550XPG, 555, 560XP, 560XPG, 57

2050, 2050 Turbo, 2051, 2054, 2055, 2063, 2145, 2149, 2149 Turbo, 2150, 2159, 2163, 370, 410, 420, 425, 435, 45, 450, 451, 455, 49, 50, 51, 510, 52, 520, 520SP, 521, 525, 535, CS 2050, CS 2050 Turbo, CS 2054, CS 2145, CS 2149, CS 2149 Turbo, CS 2150, CS 2152, CS 2152W, CS 2153, CS 2156, CS 2159, CS 2159C, CS 2159CWH, CS 2159WH, CS 2163, CS 2163WH, CS 2234, CS 2238S,
CS 2240, CS 2240S, CS 2245, CS 2250, CS 2250S, CS 2252, CS 2253, CS 2253WH, CS 2255, CS 2258, CS 2260, CS 2260WH

DCS430, DCS431, DCS46018, DCS510, DCS5121, DCS5200i, DCS520i, DCS540, DCS6000i, EA5000P53G, EA5600F, EA6100P53E, EA6100P53G, EA6100PREG, EA6101P53G

MCV51R

46, 4600, 4700, 4900, 5000, 5500, MS 1846, MS 1846AV, MS 1846AVCC, MS 1849AV, MS 1850, MS 2046AV, MS 2046AVCC, MS 2049, MS 2049AV, MS 2049AVCC, MS 2050, Mac 4600, Mac 4700, Mac 4900, Mac 5000, Mac 5500, Pro Mac 1845AV, Pro Mac 40, Pro Mac 4700, ProMac 2046AV, Silver Eagle 2818, Silver Eagle 3020, Timber Bear 20

938, 940C, 941, 945, 950, 951, 956, 962

410, 510, 540, P-360, P-400, P-450, P-5000

1074, P-21, P-26, P-28

325

190502, 190503, 190557, 190559

G390, G450AVS, G455AVS, G5000, G5000AVS, G5300, GZ500, GZ5000

613, 614, 630, 631, 632, 633, 634, 635, 636, 637, 638, 639, 640, 641, 643, 644, 645, 647, 650, 651, 651SP, 652, 654, 656

CS05, CS06

ECV-5601

Reviews

Average Customer Rating

Be the first to review this product.

Rating
Back To Top