Skip to content Skip to navigation menu
Loading...

ControlCut™ Saw Chain, 25' Reel

Part# 20BPX025U

$212.99

Out of Stock

Saw Chain
Product Family ControlCut™
Pitch
?

Pitch

Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.

.325"
Chain Type 20BPX
Gauge
?

Gauge

Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.

.050"
Drive Links
?
464
Chain Low Kickback (ANSI)
?

Chain Low Kickback (ANSI)

Certain provisions of the safety standard known as ANSI (American National Standards Institute) B175.1 - Gasoline powered Chainsaws - Safety Requirements contain requirements designed to reduce the risk of injury from chainsaws sold in the United States. The following information should be used as a guide for the selection of appropriate replacement chains in order to maintain compliance with the ANSI B175.1 standard (United States only).
The ANSI standard B175.1 divides all chainsaw power heads into two groups:
- Under 3.8 cubic-inch (62cc) engine displacement, the chainsaw MUST meet the low kickback provisions of the standard.
- 3.8 cubic inch (62cc) and larger, the chainsaw MAY OR MAY NOT meet low kickback provisions of the standard.

Any chainsaw that does not qualify as a low kickback cutting system will bear a warning such as: “WARNING – This chainsaw is capable of severe kickback that could result in serious injury to the user. Do not operate this chainsaw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chainsaws with significantly reduced kickback potential are available.Be sure to read the labels on a chainsaw before purchasing one.
When replacing chain on saws less than 3.8 cubic inches (62cc), any low-kickback chain of the proper pitch and gauge can be used. Oregon identifies and labels all low-kickback chain with green labels and all NON low kickback chain with yellow labels. Oregon safety features greatly reduce the hazard of kickback while maintaining high cutting performance. However, ALL CHAINS CAN KICKBACK, which may result in severe personal injury to the saw operator or bystander. Replacement guide bars and the ANSI standard.
The ANSI standard states:
Because of differences in replacement guide bars, the following guidelines shall be considered to determine kickback energy: Sprocket nose guide bars with the same effective length, the same number of sprocket nose teeth, and the same pitch may be considered to have equivalent kickback energy; A hard-nose guide bar having the same effective bar length, and the same or smaller nose radius as a sprocket-nose bar, may be considered to have equivalent or less kickback energy than the sprocket nose-bar; Kickback energy of all guide bar types may be considered to be less for smaller nose radius sizes.

Yes
File Size 3/16"
Package Type Reel

Specifications, Details & Support

Product Description

The 20BPX025U ControlCut™ Saw Chain reel contains 25 feet of 20BPX chain, an ideal choice for occasional users such as property owners and commercial cutters. This .325" pitch, .050" gauge chain features a low kickback design and low-vibration, Micro Chisel cutters with small radius working corners for excellent performance and easy maintenance. Compatible fit with Stihl® 23RM3 25R.

Product Details

  • Pitch: .325", gauge: .050"
  • LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
  • Blued Cutters deliver high-quality protection against corrosion
  • Top-Plate Filing Indicators make accurate sharpening easier
  • Exclusive OCS-01 Steel provides greater durability
  • For saw sizes 38-62 cc
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
General
Product UOM Each
Weight (with Packaging) 4.67 Lb
Support
Low kickback Saw Chain Warning

Parts Cross Reference

Need Help ? Contact Customer Service at +1 800-223-5168 or email us at oregonproductsupport@blount.com

Replacement Guide

23RM325R

Related Products

No Image Available

Saw Chain Sharpening Kit, 3/16"

Saw chain sharpening kit with all the necessary components for maintaining the chain including one assembled 3/16" file guide, two wooden file handles, one 3/16" round file, one flat file and one .025" drop-center depth gauge tool.

Learn More
No Image Available

Grinder, 12V Electric Sure Sharp®

Learn More
Bar and Chain Lube, 1 Qt

Bar and Chain Lube, 1 Qt

This bar and chain lube is specially compounded to provide extra high tackiness and prevent "throw off" even under adverse weather conditions. Provides maximum engine power, low friction, and faster cutting time. High film-strength prevents wear or scuffing of chain links and bars while protecting metal parts against corrosion and rust. Resists build-up of deposits such as pitch, sap or gum.

Learn More
Black Apron Chaps, Size 40

Black Apron Chaps, Size 40

Comfortable protection for your legs while logging or using your chainsaw in apron chaps design, with 8 layers breathable warp knit chainsaw protection.

Learn More
No Image Available

Chainsaw Gloves - Size 10

Chainsaw gloves with left-hand saw protection

Learn More

Other Products from Oregon

PowerCut™ Saw Chain, 25' Reel

PowerCut™ Saw Chain, 25' Reel

The Oregon PowerCut™ 20LPX025U Saw Chain reel contains 25 feet of 20LPX chain, an ideal choice for professional woodcutters who use .325" pitch saws. This .050" gauge chain features low-vibration, full chisel cutters for top performance. Compatible fit with Stihl® 23RS3 25R.

Learn More

Reviews

Average Customer Rating

Be the first to review this product.

Indicates required field