AdvanceCut™ Guide Bar, 16"

Part# 160PXDK095

$45.04

Out of Stock

Find Servicing Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Accesories Category Related Products Other Products From Oregon Similar Reviews

Guide Bar
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	59
Bar Length	16"
Tail Mount	K095
Guide Bar Code	PXD
Guard Mate Compatible	No
Intenz Intenz Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.	No
Narrow Kerf	No
Bar Nose Radius	Small
Sprocket Nose Tooth Count	9

Specifications, Details & Support

Product Description

The lightweight, durable and easy to maneuver guide bar for light commercial and occasional woodcutters using small to mid-size saws.

Product Details

Multi-rivet sprocket for long nose life
Lubritec™ system keeps your chain and guide bar oiled for less friction and longer life
Better control, less kickback
Pitch: 3/8", Gauge: .050", chain drive link count: 59
Fits Husqvarna, Dolmar, Poulan, Makita and others, for additional fit information please see the part finder.
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

General
Color	Medium Grey
Volume	21.833 in³
Product UOM	Each
Weight (with Packaging)	1.705 Lb

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregonproductsupport@blount.com

Fit Guide

109
110
111
112
113
114
115
115I
116
116SI
117
118
119
120
120 SUPER
120SI
PS-460
PS-510
PS-5100S
PS-5100SH
PS-5105
PS-5105H
PS-540
PS-6000I
PS-6100
PS-6100H
PS-6800I

130
150
150 AO
250
252
290
30
300
340
Big Red
EZ 250 AO
EZ-250
MINI SL
Super EZAO
XL-100
XL-76

2051
2054
2055
2063
2159
2163
490
520
520SP
525
535
590
CS 2050
CS 2050 Turbo
CS 2054
CS 2156
CS 2159
CS 2159C
CS 2159CWH
CS 2159WH
CS 2163
CS 2163WH
CS 2255
CS 2258
CS 2260
CS 2260WH

DCS46018
DCS510
DCS5121
DCS5200I
DCS520I
DCS540
DCS6000I
DCS6800I
EA5000P53G
EA6100P53E
EA6100P53G
EA6100PREG
EA6101P53G

MCV51R

CS05
CS06

Reviews

Average Customer Rating

Be the first to review this product.

Write a Review

Review Title

Review Description

Rating

Your Name (Optional)

Product Description

Product Details

Fit Guide

Dolmar

Efco

Homelite

Jonsered

Makita

Maruyama

Stanley

Grease Gun